|
Audio-Technica’s BP4025 stereo
condenser offers large-diaphragm
capsules in an innovative
coincident capsule
configuration. This allows for a
smaller housing while producing
an X/Y stereo image with the
spatial impact and realism of a
live sound field. Ideal for use
with professional audio and
video equipment, the microphone
is fully RoHS-compliant – free
from all substances specified in
the EU directive on the
reduction of hazardous
substances (RoHS).
|
|
Element
|
Fixed-charge back plate,
permanently polarized
condenser |
|
Polar Pattern |
X/Y Stereo |
|
Frequency Response
|
20 - 17,000 Hz |
|
Low Frequency Roll-off |
80
Hz, 12 dB/octace |
|
Open Circuit Sensitivity
|
-32 dB (25.1 mV) re 1V
at 1 Pa
|
|
Impedance
|
170Ω |
|
Maximum Input Sound
Level |
145 dB SPL, 1 kHz at 1%
T.H.D. 155 dB SPL, with
10 dB pad (nominal) |
|
Dynamic Range |
131 dB, 1 kHz at Max SPL
|
|
Signal-to-Noise Ratio |
80 dB, 1 kHz at
1 Pa;
|
|
Phantom Power
Requirements |
11-52V DC, 7 mA typical
(both channels total) |
|
Switch |
Flat,
roll-off; 10 dB pad
nominal |
|
Weight
|
269 g |
|
Dimensions
|
186.0 mm (7.32") long,
47.6 mm (1.87") maximum
head diameter, 21.0 mm
(0.83") body diameter |
|
Output Connector
|
Integral 5-pin XLRM-type |
|
Cable |
5.0 m (16.5') long, 8
conductor, shielded,
vinyl-jacketed stereo
cable with 5-pin
XLRF-type connector at
microphone end and two
3-pin XLRM-type
connectors at output end |
|
Accessories |
AT8405a stand clamp for
5/8"-27 threaded stands;
windscreen; soft
protective pouch |
|
|
