|
The
length (14.53") of the AT8035
Line + Gradient Condenser
Microphone is well-suited for
ENG, outdoor recording and other
specialized uses. The microphone
is designed for video production
and broadcast (ENG/EFP) audio
acquisition. Suited for both
boom & handheld use, it provides
the narrow acceptance angle
desirable for long-distance
sound pickup, featuring
excellent sound rejection from
the sides and rear of mic and
switchable low-frequency
roll-off. It operates on battery
or phantom power.
|
|
Element
|
Fixed-charge back plate,
permanently polarized
condenser |
|
Polar Pattern |
Line + Gradient |
|
Frequency Response
|
40 - 20,000 Hz |
|
Low Frequency Roll-Off |
80 Hz, 12 dB/octave |
|
Open Circuit Sensitivity
|
Phantom: –38 dB (12.5
mV) re 1V at 1 Pa
Battery: –39 dB (11.2
mV) re 1V at 1 Pa |
|
Impedance
|
Phantom: 250 ohms
Battery: 300 ohms |
|
Maximum Input Sound
Level |
Phantom: 132 dB SPL, 1
kHz at 1% T.H.D.
Battery: 120 dB SPL, 1
kHz at 1% T.H.D. |
|
Dynamic Range |
Phantom: 110 dB, 1 kHz
at Max SPL
Battery:
98 dB, 1 kHz at Max SPL |
|
Signal-to-Noise Ratio |
72 dB, 1 kHz at 1 Pa |
|
Phantom Power
Requirements |
11-52V DC, 2 mA typical |
|
Battery Type |
1.5V AA/UM3 |
|
Battery Life |
0.4 mA / 1200 hours
typical
(alkaline) |
|
Switch |
Flat, roll-off |
|
Weight
|
170 g |
|
Dimensions
|
369.0 mm (14.53") long,
21.0 mm (0.83") diameter |
|
Output Connector
|
Integral 3-pin XLRM-type |
|
Accessories |
AT8405a stand clamp for
5/8"-27 threaded stands;
5/8"-27 to 3/8"-16
threaded adapter; AT8132
windscreen; battery;
protective carrying case |
|
|
