Audio Technica AT899 Subminiature Omnidirectional Condenser Lavalier Microphone

Audio Technica AT899
Audio Technica AT899

Audio Technica AT899 Subminiature Omnidirectional Condenser Lavalier Microphone

Product Code: AT899

Buy Sell Sales Audio Technica AT899


Features
• Maximum intelligibility and clean, accurate reproduction
• Ideal for vocalists, lecturers, stage and television talent, and houses
• Low-profile design (a mere 5 mm in diameter)
• Operates on battery or phantom power
• 3m cable permanently attached to mic, TA3F connector at power module
• Extensive array of provided accessories

For interviews, documentary, film and theatre applications. With AT8537 power module and AT899AK accessory kit. Audio-Technica’s omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.

Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 20 - 20,000 Hz
Low Frequency Roll-Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity Phantom : –43dB (7.0mV), re 1V at 1Pa - Battery : 46dB (5,0mV), re 1V at 1Pa
Impedance Phantom 200 Ω - Battery 250 Ω
Maximum Input Sound Level Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. - Battery: 116 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range Phantom: 108dB,1 kHz at max SPL - Battery: 86dB ,1 kHz at max SPL
Signal to Noise Ratio 64 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery current life 0.4 mA / 1200 hours typical (alkaline)
Switch Flat, roll-off (recessed)
Weight Microphone: 0.5 g
Power module: 102 g
Dimensions Microphone 16.0 mm long, 5.0 mm diameter - Power Module 145.0 mm long, 21.0 mm diameter
Output Connector Integral 3-pin XLRM-type
Cable 3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
Accessories AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens;
battery; protective carrying case