AT825, OnePoint Microphone |
Product Code: AT825
|
Designed for broadcast, professional recording, and DAT field use, Audio-Technica's compact, lightweight AT825 is perfect for
camera-mount applications. The microphone is equipped with two balanced outputs for use with professional audio and video equipment.
Its closely matched elements provide the spatial impact and realism of a live sound field. With switchable low-frequency roll-off the versatile
AT825 operates on either battery or phantom power.
|
|
AT825 Features |
• Compact, lightweight design is perfect for camera-mount applications • Closely-matched elements provide the spatial impact and realism of a live sound
field • Balanced outputs; switchable low
frequency roll-off • Operates on
battery or phantom power |
|
AT825 Specifications
Element |
Fixed-charge back plate, permanently polarized condenser |
Polar Pattern |
X/Y Stereo |
Frequency Response |
30-20,000 Hz |
Low Frequency Roll-off |
150 Hz, 6 dB/octave |
Open Circuit Sensitivity |
–47 dB (4.4 mV) re 1V at 1 Pa |
Channel Balance |
?2.5 dB |
Impedance |
200 ohms balanced |
Maximum Input Sound Level |
126 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range (Typical) |
102 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio |
70 dB, 1 kHz at 1 Pa |
Phantom Power Requirements |
5-52V DC, 2 mA typical (each channel) |
Battery Type |
1.5V AA/UM3 |
Battery Life |
2 mA / 1000 hours typical (alkaline) |
Switch(es) |
Flat, roll-off (recessed) |
Weight |
240 g (8.5 oz) |
Dimensions |
214.0 mm (8.43") long, 62.0 mm (2.44") head width, 21.0 mm (0.83") body diameter |
Output Connector |
Integral 5-pin XLRM-type |
Cable(s) |
5 m (16.5') long, 8 conductors under two shields, vinyl-jacketed, stereo cable with 5-pin XLRF-type connector at microphone end, two 3-pin XLRM-type connectors at output end |
Accessory Included |
AT8405a stand clamp for 5/8"-27 threaded stands; battery; AT8120 windscreen; soft protective pouch |
Audio-Technica Case Style |
S3 |
|
|
|
MKH 416
UWP-D11
UWP-D12
UWP-D16
MKE 600
|