|
The XH200 is the ideal distribution power amp for use with numerous high-impedance speakers in theatre, hall, and
conference facility installations. In addition to being remarkably lightweight, the XH200 is a compact 2U size that will fit comfortably in just about any
installation. This combination of high power output and small size has been realized through the use of an advanced switching power supply. The XH200 also
features a monitor/remote connector that allows remote status monitoring and control from an external device.
|
• Two 200W Channels In a 2U Power Amp
The XH200 is a two-channel high-output power amp that can be switched between 70V and 100V line operation (200W x 2 channels into 24ohms-70V / 48ohms-100V).
This high-impedance power amp is designed for installations in which multiple speakers are driven in parallel. A high-efficiency switching power supply means
that the XH200 is significantly smaller and lighter than comparable amplifiers: it fits comfortably in a 2U rack space and weighs only 10 kg.
• Monitor/Remote and Other Important Functions
A rear-panel MONITOR/REMOTE connector allows the unit to be controlled or monitored from a remote location. The front panel provides dB-calibrated
detented attenuators for each channel, and a comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range of conditions.
• Euroblock Input/Output Connectors, and Barrier Strip Output Connectors
Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection. High pass filters with switchable 40 Hz or
80 Hz roll-off provide an extra margin of system flexibility. |
| 100V models |
XH200 |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| 120V models |
XH200 |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| 230V models |
XH200 |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| 240V models |
XH200 |
| Output power; 20Hz-20kHz |
70V line |
200W x 2, RL=50ohms |
| 100V line |
200W x 2, RL=25ohms |
| General specifications |
XH200 |
| Total harmonic distortion |
Less than 0.1% (40Hz-20kHz; Halfpower), RL=4ohms |
| Intermodulation distortion |
Less than 0.1% (60Hz:7kHz=4:1; Halfpower) |
| Frequency response |
+0dB, -0.5dB (HPF=40Hz, 80Hz~20kHz) |
| S/N ratio |
More than 103dB (DIN AUDIO) |
| Hum & noise level |
Residual output noise |
Less than -65dBu |
| Crosstalk |
Less than -60dB |
| Voltage gain |
38dB (100V), 35dB (70V) |
| Input sensitivity |
+4dBu |
| Maximum input voltage |
+22dBu |
| I/O Connectors |
Line input / output ports |
2x Euroblock |
| Speaker output ports |
2x Barrier strip |
| Control ports |
D-sub 15pin |
| Processors |
HPF (40Hz/ 80Hz, 12dB/oct) |
| Protection circuit |
Load protection |
Power switch on/off mute, DC-fault (Output relay off; Restored automatically), Clip limiting (THD ≥ 0.5%) |
| Amplifier protection |
Thermal (Mute the output; heatsink temp ≥ 90°C; return automatically), VI limiter (Limit the output, RL ≤ 16ohms) |
| Power supply protection |
Thermal (Amplifier shuts down automatically, Operation not restored automatically; heatsink temp ≥ 90°C) |
| Amplifier class |
EEEngine |
| Cooling |
Variable-speed fan |
| Power requirements |
Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz |
| Power consumption |
Music source equivalent |
400W |
| Idling |
40W |
| Stand-by |
5W |
| Dimensions |
W |
480mm; 18-7/8in |
| H |
88mm; 3-7/16in (2U) |
| D |
412mm; 16-1/4in |
| Net weight |
9.8kg; 21.6lbs |
| Accessories |
Owner’s manual, AC power cable, Security cover, 4x 3-pin Euroblock connector |
|
|
|
