|
Yamaha Analog Mixer - MG10/2, MG8/2FX |
|
Model: MG10/2,
MG8/2FX
Yamaha Analog Mixer
Microphone-stand mountable compact mixers that
offer big sonic performance. The FX model feature built-in
effects |
Features
Specifications |
|
From compact, portable mixers to serious
live-sound consoles with built-in Yamaha SPX effects, the MG-series
delivers superior sound and build quality that is top of the
class
If you only need to mix a few
sources to stereo but want the best audio quality available, the
MG10/2 or MG8/2 may be exactly what you need. Both models are
remarkably light and compact, and can even be mounted on a
microphone stand with an optional adaptor. The MG8/2FX additionally
provides top-quality Yamaha SPX effects built in, offering
extraordinary sonic versatility in a very compact and portable
unit
Compact
Mixers Offer Simplicity and Superior Quality
If you need a basic mixer to create a high-quality stereo mix from
a small number of input sources, the MG10/2 or MG8/2FX may be
exactly what you need. They are compact and easy to use, while
delivering uncompromised audio quality. They're so compact, in
fact, that an optional adaptor can be used to mount them on a
microphone stand for easy access. The MG8/2FX includes a selection
of top-quality Yamaha digital effects, so you won't need any extra
equipment to create and refine your sound. The MG10/2 and MG8/2FX
are ideal choices for an ultra-compact music/demo production
system, or for small live sound applications
|
Features |
- 10 Inputs on the MG10/2, or 8
Inputs On the MG8/2FX
- Versatile Inputs
- Four Top-quality Microphone
Preamps
- Switchable
Phantom Power
- Insert I/O
- 3-band EQ and High-pass
Filters
|
- Send and Stereo
Return
- Comprehensive Output
Connectors
- 12-segment Level
Meters
- Compact, Portable
Design
- Optional Adaptor for Microphone
Stand Mounting
- Intuitive Controls and High
Reliability
- High-performance Digital Effect
Processor Built In (MG8/2FX)
|
General
Specifications |
|
MG10/2 |
MG8/2FX |
MG12/4 |
MG12/4FX |
MG16/4 |
MG16/6FX |
Total harmonic distortion: |
Less than 0.1% (THD+N), 20Hz-20kHz @ +14dBu (ST OUT)
*3 |
Frequency response: |
-3, 0, +1dB, 20Hz-20kHz @ +4dBu (ST OUT) |
Hum & noise*1: |
-128dBu (Equivalent input noise)
-100dBu (Residual noise)
20Hz-20kHz, Rs=150ohms, Input Gain=Max, Input sensitivity=-60dB
*3 |
Crosstalk |
-70dB @ 1 kHz |
Phantom Power |
+48V |
Graphic equalizer: |
- |
7-band
±12dB |
Effect |
- |
16 PGMs
+ Parameter Control |
- |
16 PGMs
+ Parameter Control |
- |
16 PGMs
+ Parameter Control |
Dimensions |
H |
65mm |
108mm |
D |
290mm |
416.6mm |
W |
251mm |
322mm |
423mm |
Weight: |
1.8kg |
5.0kg |
5.2kg |
5.5kg |
Power consumption: |
19W |
20W |
29W |
30W |
36W |
51W |
Power requirements*2: |
AC100V 50/60Hz
AC120V, 60Hz
AC220V, 50/60Hz
AC230V, 50Hz
AC240V, 50Hz |
Others: |
Mic
Stand Mountable |
Foot
Switch jack (ON/OFF)
Mic Stand Mountable |
Rack
Mountable |
Foot
Switch jack (ON/OFF)
Rack Mountable |
Rack
Mountable |
Rack
Mountable |
*1 Hum & Noise are measured with a
6dB/octave filter @ 12.7kHz;equivalent to a 20kHz filter with
infinite dB/octave attenuation.
*2 Power Supply Adaptor PA-10 (MG10/2,MG8/2FX), PA-20
(MG12/4,MG16/4,MG12/4FX), PA-30 (MG16/6FX) |
|
Input Characteristics MG12/4,
MG16/4 |
Input
Terminal |
Gain
Trim |
Input Level |
Actual Load
Impedance |
For use with
nominal |
Connector in
Mixer |
Nominal |
Max. before clip |
CH IN MIC |
-60 |
-60dB |
-40dBu |
3kohms |
50-600ohm Mics |
XLR-3-31 type |
-16 |
-16dBu |
+4dBu |
CH IN LINE |
-34 |
-34dBu |
-14dBu |
10kohms |
600ohm Line |
TRS phone jack |
10 |
+10dBu |
+30dBu |
ST CH MIC IN |
-60 |
-60dB |
-40dBu |
3kohms |
50-600ohm Mics |
XLR-3-31 type |
-16 |
-16dBu |
-10dBu |
ST CH LINE IN |
-34 |
-34dBu |
-14dBu |
10kohms |
600ohm Line |
TRS phone jack |
10 |
+10dBu |
+30dBu |
ST CH
INPUT |
-10dBu |
+10dBu |
10kohms |
600ohm
Line |
Phone
jack,
RCA Pin jack |
CH
INSERT IN |
0dBu |
+20dBu |
10kohms |
600ohm
Line |
TRS
phone jack |
AUX
RETURN [L, R] |
+4dBu |
+24dBu |
10kohms |
600ohm
Line |
phone
jack |
2TR IN
[L, R] |
-10dBV |
+10dBV |
10kohms |
600ohm
Line |
RCA Pin
jack |
|
Input Characteristics
MG8/2FX |
Input
Terminal |
Gain
Trim |
Input Level |
Actual Load
Impedance |
For use with
nominal |
Connector |
Nominal |
Max. before clip |
CH IN MIC (1-2) |
-60 |
-60dB |
-40dBu |
3kohms |
50-600ohm Mics |
XLR-3-31 type |
-16 |
-16dBu |
+4dBu |
CH IN LINE (1-2) |
-34 |
-34dBu |
-14dBu |
10kohms |
600ohm Line |
TRS phone jack |
10 |
+10dBu |
+30dBu |
ST CH MIC IN (CH 3-4, 5-6) |
-60 |
-60dB |
-40dBu |
3kohms |
50-600ohm Mics |
XLR-3-31 type |
-16 |
-16dBu |
-10dBu |
ST CH LINE IN (CH 3-4, 5-6) |
-34 |
-34dBu |
-14dBu |
10kohms |
600ohm Line |
phone jack |
10 |
+10dBu |
+30dBu |
ST CH
INPUT (CH 7-8) |
-10dBu |
+10dBu |
10kohms |
600ohm
Line |
Phone
jack,
RCA Pin jack |
CH
INSERT IN (1-2) |
0dBu |
+20dBu |
10kohms |
600ohm
Line |
TRS
phone jack |
AUX
RETURN [L, R] |
+4dBu |
+24dBu |
10kohms |
600ohm
Line |
phone
jack |
2TR IN
[L, R] |
-10dBV |
+10dBV |
10kohms |
600ohm
Line |
RCA Pin
jack |
|
Input Characteristics
MG10/2 |
Input
Terminal |
Gain
Trim |
Input Level |
Actual Load
Impedance |
For use with
nominal |
Connector |
Nominal |
Max. before clip |
CH IN MIC (1-2) |
-60 |
-60dB |
-40dBu |
3kohms |
50-600ohm Mics |
XLR-3-31 type |
-16 |
-16dBu |
+4dBu |
CH IN LINE (1-2) |
-34 |
-34dBu |
-14dBu |
10kohms |
600ohm Line |
TRS phone jack |
10 |
+10dBu |
+30dBu |
ST CH MIC IN (CH 3-4, 5-6) |
-60 |
-60dB |
-40dBu |
3kohms |
50-600ohm Mics |
XLR-3-31 type |
-16 |
-16dBu |
-10dBu |
ST CH LINE IN (CH 3-4, 5-6) |
-34 |
-34dBu |
-14dBu |
10kohms |
600ohm Line |
phone jack |
10 |
+10dBu |
+30dBu |
ST CH
INPUT (CH 7-8,9-10) |
-10dBu |
+10dBu |
10kohms |
600ohm
Line |
Phone
jack,
RCA Pin jack |
CH
INSERT IN (1-2) |
0dBu |
+20dBu |
10kohms |
600ohm
Line |
TRS
phone jack |
AUX
RETURN [L, R] |
+4dBu |
+24dBu |
10kohms |
600ohm
Line |
phone
jack |
2TR IN
[L, R] |
-10dBV |
+10dBV |
10kohms |
600ohm
Line |
RCA Pin
jack |
|
|
Output Characteristics
MG8/2FX |
Connection |
Actual Source
Impedance |
For use with
nominal |
Output Level |
Connector In
Mixer |
Nominal |
Max. before clip |
ST Out
[L, R] |
150ohms |
10kohms
Lines |
+4dBu |
+20dBu |
TRS
phone jack |
EFFECT
SEND |
150ohms |
10kohms
Lines |
+4dBu |
+20dBu |
TRS
phone jack |
CH
Insert Out (1-2) |
150ohms |
10kohms
Lines |
0dBu |
+20dBu |
TRS
phone jack |
2TR OUT
[L, R] |
600ohms |
10kohms
Lines |
-10dBV |
+10dBV |
RCA Pin
jack |
C-R OUT
[L, R] |
150ohms |
10kohms
Lines |
+4dBu |
+20dBu |
TRS
phone jack |
Phones
Out |
100ohms |
40ohms
Phones |
3mW |
75mW |
ST phone
jack |
|
Output Characteristics
MG10/2 |
Connection |
Actual Source
Impedance |
For use with
nominal |
Output Level |
Connector In
Mixer |
Nominal |
Max. before clip |
ST Out
[L, R] |
150ohms |
10kohms
Lines |
+4dBu |
+20dBu |
Phone
jack(TRS) *6 |
AUX
SEND |
150ohms |
10kohms
Lines |
+4dBu |
+20dBu |
Phone
jack(TRS) *6 |
CH
Insert Out (CH1-8) |
150ohms |
10kohms
Lines |
0dBu |
+20dBu |
Phone
jack(TRS) *5 |
2TR OUT
[L, R] |
600ohms |
10kohms
Lines |
-10dBV |
+10dBV |
RCA Pin
jack |
CR Out
(L,R) |
150ohms |
10kohms
Lines |
+4dBu |
+20dBu |
Phone
jack(TRS) *6 |
Phones
Out |
100ohms |
40ohms
Phones |
3mW |
75mW |
ST phone
jack |
|
|
|
|