Yamaha DSR-115 2-way, Bi-amp Powered Speaker |
Product Code: DSR115
|
Yamaha DSR Series takes portable loudspeakers to the extreme limits of their potential. Output levels pushed to
the highest sound pressure levels possible, yet in cabinets that are lightweight and compact.Sound resolution remains superb, no matter how hard or for how long
the speakers are driven. Designed by applying our leading-edge digital and acoustic technologies developed over decades, the DSR Series provides a listening experience that re-defines high definition sound reinforcement.
For loudspeakers you can count on to deliver the musicality and sound that will thrill audiences night after night, let the DSR Series power your performances to incredible new heights.
• Ultra-precise 48-bit digital sound processing
• D-CONTOUR (Dynamic-CONTOUR) multi-band dynamic processing
• All-new 1300W Class-D amplifiers with PFC switching mode power supply
• Maximum SPL 136dB peak
• Extensive protection of the transducers, amplifiers and power supply from high performance DSP
• Premium-grade, custom-designed transducers
• Exclusive 90° × 60° CD Waveguide Horn
• Compact and lightweight (28.0kg / 62lbs)
• Stand and pole mountable, with 35mm pole sockets
• Integrated M10 rigging points for suspended applications
 |
Xtreme D-Powered by Leading-Edge Digital Technology
The DSR development team took full advantage of a number of advanced digital technologies, both new and refined, based on Yamaha's extensive experience accumulated over many long years of developing
professional audio equipment.
Leading-edge digital technological innovations incorporated into the DSR Series loudspeakers include Integral Digital Tuning, Intelligent Dynamic Control, Powerful Digital
Drive and Extensive DSP Protection. These four "D" technologies combine to make possible the extreme performance capabilities of the DSR Series, hence the name: Xtreme D is born. |
| |
|
 |
High Performance Digital Signal Processor and 24-bit Discrete AD and DA Converters
All signals are precisely processed by a 48-bit internal processing (76-bit accumulator) high performance processor for optimum sound quality.
The DSR Series employs high precision discrete AD and DA converters with superior S/N ratio and dynamic range. The analog signal is transmitted on dual channels, converted to digital and summed inside the processor. By using this algorithm, approximately 3dB of improvement
in S/N ratio was realized |
| |
|
Integral Digital Tuning
Ideal combination of ultra-precise 48-bit digital sound processing, advanced electronic and acoustic technologies delivers unparalleled high definition sound.
 |
| |
|
FIR-X tuning
The digital crossover networks employ high-order FIR* filters that provide linear phase response. Yamaha's proprietary FIR-X tuningT simultaneously optimizes frequency and phase response, while adjusting
the time alignment between the HF and LF transducers.
The end result is sound quality with much better clarity and imaging than is possible with typical crossovers.
* Finite Impulse Response
 |
| |
|
D-CONTOUR (Dynamic-CONTOUR)
D-CONTOUR is a multi-band dynamic processor featuring intelligent sensing. Normally a compressor is used to boost SPL, but this would effect the entire audio bandwidth resulting in a constricted feel to the
sound. D-CONTOUR works by constantly monitoring the output of multiple frequency bands, feeding the data back into the intelligent sensing system.
This system then calculates the optimum EQ adjustments for each
frequency band, resulting in maximum SPL while maintaining musicality. These EQ adjustments are performed in a highly intelligent manner, linked directly to the auditory response of the human ear. Hence the DSR
Series can continuously deliver sound that is natural, clear and powerful - regardless of volume. D-CONTOUR can be turned on or off depending on the acoustic environment and type of sound desired.
 |
| |
|
 |
1300W (LF850W, HF450W)* High Power, High Sound Quality Class-D Amplifiers
Yamaha's next-generation Class-D amplifiers deliver as much as 1300W* of power with precision damping for tight and crisp sound from compact, lightweight modules. Through the ideal combination of amplifiers,
transducers and DSP, the DSR Series loudspeakers provide the highest levels of power in their class and SPL up to 138dB, while maintaining precise dynamics and sound reproduction. Efficiency is such that
convection cooling is all that is necessary, eliminating the need for fans. |
| |
|
 |
HF transducer
HF: The high frequencies of all full range models are handled by a 2" titanium diaphragm neodymium compression driver capable of reproducing incredibly transparent, accurate high frequencies up to 20kHz. The 2"
voice coil is large for this class of speaker. It provides high power handling for powerful sound with low distortion even at high outputs.
The HF transducers use lightweight, compact neodymium magnets,
significantly contributing to the low weight of the loudspeaker system for easy portability. Thanks to these high performance components, the DSR Series exhibits superior dynamics even at high volumes and extremely
clear vocals for superb performance in a wide range of environments, from small venues to large halls and outdoor PA. |
| |
|
 |
LF transducer
LF: The DSR Series cast aluminum woofers boast a large 3" voice coil*, and the DSR112 and DSR115, designed for easy portability, have light, strong neodymium magnets. This makes the speakers lightweight yet
capable of delivering awesome power with warmth and deep bass response.
The woofers' superior bass range control and reproduction of mid-bass vocal presence produces fast, powerful bass that does not affect the contour, achieving sound with minimal distortion, even during high volume outputs. |
| |
|
 |
Exclusive Wide Dispersion CD Waveguide Horn
The DSR Waveguide Horn was designed with the goal of minimizing the radiation pattern deterioration in oblique directions seen in conventional horns in order to achieve a more ideal coverage area without irregularities.
With the new Wide Dispersion CD Waveguide Horn, sound expands in a more rectangular pattern, providing 90° horizontal x 60° vertical coverage with wide frequency sound projected all the way to
the edges of the coverage area. This uniformly balanced output and high sound quality throughout the listening space maximizes audience satisfaction. |
| |
|
Reliability and Functionality to Meet the Highest Professional Standards
- Newly designed deep pocket handles are highly robust yet lightweight and providing comfortable handling, further improving portability. These handles are not only ergonomically correct, they also minimize
performance impairing resonances inside the cabinet.
- Heavy-duty powder-coated 16-gauge(1.6mm) steel grilles protect internal components from the rigors of road abuse.
- The exteriors feature a LINE-X® coating with extremely high damage resistance to protect the cabinet from scratches during transport and use. This coating is also very resistant to deterioration over time,
maintaining a professional appearance that can withstand many long years of use.
- Every DSR Series loudspeaker has a locking IEC power connector and cable. Just push in the AC cord to create a positive lock with the amp module, so there is little chance of accidental disconnection during a
performance. If damaged or lost, the locking cable can be easily replaced with a standard IEC cable if needed.
 |
| Speaker type |
15" 2-way, Bi-amp powered Speaker, Bass-reflex Type |
| Frequency range (-10dB) |
45Hz ~ 20kHz |
| Frequency response (-3dB) |
55Hz ~ 18kHz |
| Nominal coverage |
H |
90° |
| V |
60° |
| Components |
LF |
15" cone |
| HF |
2" Titanium diaphragm compression driver |
| Crossover |
FIR-X tuning (linear phase FIR filter) |
| Output power |
1300W (LF: 850W HF: 450W) |
| Maximum output level (1m; on axis) |
136dB SPL |
| I/O connectors |
INPUT:XLR-3-31 x1 (Balanced) TRS Phone Jack x1 (Balanced), OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT |
| Processors |
D-CONTOUR (Dynamic CONTOUR) |
| Power consumption |
100W |
| Flying and mounting hardware |
3 x M10 (TOP L/R 1pc each, Bottom rear 1pc) |
| Pole socket |
35mm (Bottom Board) |
| Dimensions |
W |
442mm (17 4/8") |
| H |
755mm (29 6/8") |
| D |
423mm (16 4/8") |
| Net weight |
28.0kg (62lbs) |
|
|
|
|
