The VP-81KSi is a
high-performance analog step-in switcher for computer graphics video with
resolutions up to WUXGA and unbalanced stereo audio signals. The unit can switch
any one of eight inputs to one computer graphics video, one unbalanced and one
balanced stereo audio and one twisted pair output. The VP-81KSi works in
conjunction with up to eight VGA Remote Control Step-in Modules including the
SI-1VGA (for TBUS-10), SI-VGAT (under the table) and WSI-1VGA (for standard
TBUSes).
Features:
•
High
Bandwidth - 440MHz (−3dB), CAT 5 (Rec Out) up to WUXGA.
•
HDTV
Compatible.
•
Kr-isp®
Advanced Sync Processing - Ensures compatibility with a wide range of computers
(even if the sync level is too low) by restoring the sync signal waveform.
•
Remote
Step-In Switching - Up to 8 users, connected through SI−1VGA remote
input/switching step−in modules, can each step in to switch the input to the
local remote PC.
•
I-EDIDPro™
Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing
algorithm ensures Plug and Play operation for analog systems.
•
Multiple
Unit Cascade - Cascades up to 8 units to create a "virtual" switcher of up to 57
inputs.
•
Audio
Switching Modes - Audio−Follows−Video (AFV) and audio breakaway switching.
•
Flexible
Control Options - Front panel, remote step−in panels, RS−232 (K−Router™
Windows®−based software is included), RS−485, Ethernet via a built−in Web
server, contact closure & IR remote (included).
•
Worldwide
Power Supply - 100−240V AC.
•
Size -
Standard 19" (1U). Rack "ears" included.
Applications:
•
Display
systems requiring simple input selection.
•
Remote
monitoring of computer activity in schools and businesses.
•
Rental/staging applications.
•
Multimedia
and presentation source selection. |
|
INPUTS: |
8 UXGA on 15−pin HD (F) connectors, 8
unbalanced stereo audio on 3.5mm mini jacks. |
|
OUTPUTS: |
1 UXGA on 15−pin HD connector, 1 twisted
pair on RJ−45 connector, 1 unbalanced stereo audio on a 3.5mm mini jack,
1 balanced audio stereo on a 5−pin detachable terminal block. |
|
MAX. OUTPUT LEVEL: |
Video: 2Vpp; Audio: stereo unbalanced
7.8Vpp, stereo balanced 15.6Vpp differential. |
|
BANDWIDTH (-3dB): |
Video: out 440MHz, CAT 5 (Rec Out) 150MHz;
Audio: stereo unbalanced 20kHz, stereo balanced 20kHz. |
|
VIDEO RESOLUTION: |
VGA to WUXGA. |
|
DIFF. GAIN: |
XGA: 0.04%. |
|
DIFF. PHASE: |
UXGA: 0.07Deg. |
|
K FACTOR: |
UXGA: 0.2%. |
|
S/N RATIO: |
Video: UXGA 68.3dB @5MHz; Audio: stereo
unbalanced 74dB @1KHz, stereo balanced 74.4dB @1kHz; CAT 5 (Rec Out)
69.8dB. |
|
CROSSTALK (all hostile): |
Video: UXGA –52dB @5MHz; Audio: local stereo
unbalanced –73dB @1KHz, local stereo balanced <72dB @1kHz. |
|
VOLUME CONTROL: |
Audio: stereo unbalanced −65.4 to 25.8dB;
stereo balanced −59.4 to 31.8dB. |
|
COUPLING: |
Video: UXGA−DC, TP Out−DC; Audio: stereo
unbalanced−In AC, Out DC, stereo balanced−In AC, Out DC. |
|
AUDIO THD + NOISE: |
Stereo unbalanced 0.08%, stereo balanced
0.08%. |
|
AUDIO 2nd HARMONIC: |
Stereo unbalanced 0.001%, stereo balanced
0.001%. |
|
POWER CONSUMPTION: |
100−240V AC 50/60Hz, 29VA. |
|
DIMENSIONS: |
43.6cm x 19.1cm x 4.4cm (19” x 7.5” x 1U) W,
D, H rack−mountable. |
|
WEIGHT: |
1.7kg (3.8lbs) approx. |
|
INCLUDED ACCESSORIES: |
Power cord, Windows® based Kramer control
software, RC−IR3 infrared remote control transmitter, one SI−1VGA remote
step−in module, rack "ears". |
|
OPTIONS: |
External remote IR receiver cable, 15m
extension cable, SI−1VGA remote step−in module. |
|
|
|
