|
|
|
| O
810 - Active Studio Subwoofer |
Product Code:
O810 |
|
General
Description
As consumer technology advances at
ever faster rates, professional technology increasingly finds
itself trying to keep up. An example of this is the advent of the
Blu-ray and other high definition formats that have increased the
audio channel count to 7.1.
The O 810 is an answer to these new demands by offering a new 7.1
High Definition Bass Manager™. This is compatible with all
standard consumer formats from mono through to the latest 7.1 HD
systems. Eight channels of analog ensures flexible
interconnectivity for modern studios. Four-mode LFE-channel
processing guarantees compatibility across all formats and
industries. Forth-order crossovers and flexible acoustical controls
allow for seamless system integration. Built-in volume control and
a hardware remote control allows for centralized system control
independent of the source, and the electronics can be remote
located to reduce cabling
The latest amplifier technology and acoustical components have been
used to ensure the most accurate sound reproduction possible.
Robust drivers, a rock-solid cabinet, and carefully designed ports
guarantee a tight, articulate, and distortion-free low frequency
reproduction, even at high replay levels. Using the sum output,
Plane Wave Bass Array™ (PWBA™) techniques acoustically
improves lateral consistency in the listening area. The Bass
extends down to 18 Hz.
The O 810 subwoofer is designed to complement our extensive range
of monitors, and can be used on its own, or daisy-chained to make
larger systems capable of higher SPL. The O 810 can be used in
music, broadcast, and post production studios for tracking, mixing,
and mastering. The cabinet can be positioned next to a wall or
flush mounted into a wall due to the front mounted port, and can be
mixed freely in multichannel systems with other loudspeakers from
our range
|
|
Features
|
Flexible electronics
7.1 Channel High Definition Bass Management™ compatible with
all formats from mono to 7.1
Bypassable 4th order 80 Hz active crossover for maximum
compatibility with consumer reproduction
0 and +10 dB LFE gain and 4-mode LFE processing:
LFE to subwoofer and left/right
LFE to subwoofer only up to 80 Hz
LFE to subwoofer only up to 120 Hz
LFE to subwoofer with no filtering – for daisy chaining
subwoofers and external signal processing systems
Independent control of Bass Management for front and back
channels
System wide volume control via optional hardware remote controls or
RS-232
Acoustical controls adapt the subwoofer’s response to the
environment
output level
Low cut
Parametric equalizer
45° step phase control with a built-in test signal
Larger systems and Plane Wave Bass Arrays™ maybe constructed
using the Sum output
Remoteable electronics (REK 2 and an SC nn) for installation
convenience, less cabling, and convenience of use
Integrated electronic limiter for amplifier and driver
protection
Low heat dissipation amplifier
Electronics can be remotely powered on with two modes of operation
(0 V and 12 V trigger)
Robust driver
and Cabinet
Low frequency extension for main loudspeakers down to 18 Hz
Low distortion magnetically shielded long-throw driver
Reduced bass compression at high SPL
Allows main loudspeakers to play louder and with lower
distortion
Wooden Cabinet with a tough painted finish (anthracite or silver)
and high density rubber isolating feet
Excellent self-damping properties leading to minimal Cabinet
resonances
Cabinet look conforms to the family design
Extensive
accessories range
Remote controls (SRC 1, SRC2) and remote cables (RC 2, RC 5, RC 10,
RC 15, RC 20, RC 25, RC 30)
Remote electronics Kit (REK 2) and driver cables (SC 2, SC 5, SC
10, SC 15, SC 20, SC 25, SC 30)
Flight case (FO 810) |
|
Delivery
Includes
|
|
1x O 810
3x Power cables (Euro, UK, USA)
1x Operating manual
1x Angles chart
1x Production calibration certificate
1x Product guarantee
1x Trimmer and switch screwdriver
|
|
