Neumann O 410

Neumann O 410

Active Studio Monitor

Neumann O410

Homepage  |   Azden  |   Zoom  |   Sound Devices  |   Sennheiser  |   Tascam  |   Yamaha  |  JBL  | Mackie  | Audio Technica  | Rode  | SHURE  | Beyerdynamic  | Contact us
Home > Neumann > Studio Monitor Systems > O 410

 Neumann O 410 Active Studio Monitor

Neumann O 410
Product Code: O410
Neumann O410

Back in 1967, Neumann launched the world�s first active multi-channel studio monitor, the OY. The O 410 represents the latest incarnation of the many technologies pioneered by us during the intervening 40 years. Engineering excellence applied to all aspects of the O 410 design brings a new benchmark in audio reproduction quality. A waveguide featuring Mathematically Modeled Dispersion� (MMD�), flexible acoustical controls, various input options, and an extensive mounting hardware range allow the O 410 to be used in diverse acoustical conditions, with any source equipment, and in a wide variety of physical locations.

The O 410 has been designed for use as a mid-field or main monitor. It is particularly well-suited for use in music, broadcast, and post production studios for tracking, mixing, and mastering. The O 410 can be used free-standing or flush mounted into a wall, and, in multichannel systems, can be mixed freely with other loudspeakers in the range.
Mid Sized 3-way System
� The most important part of the frequency spectrum is reproduced by a separate midrange driver
� Extremely low harmonic and intermodulation distortion results in clean sounding audio reproduction
� Exceptionally neutral sound stage from 30 Hz to 24 kHz (�3 dB)
� Ideal cabinet materials with excellent self-damping properties
� Structural resonances avoided using LRIM� (Low Resonance Integral Molding�)
� Vented enclosure extends bass response, even at very high output
� Modern-looking design with optional grille
� Extensive accessories allow for a multitude of installation possibilities
� Magnetically shielded for use next to CRT screens
 
Mathematically Modeled Dispersion� (MMD�)
� Three stage design process:
  Waveguide is mathematically modeled before physical prototypes are realized, 
  Physical prototypes are measured under anechoic conditions to verify theoretical performance,
  Extensive listening tests correlate objective measurements and subjective perception
� Wide horizontal directivity gives increased freedom of movement along the mixing console
� Narrow vertical directivity reduces the effect of early reflections off the console surface
� MMD� is easily rotated in the field when horizontal mounting the cabinet
� Perfect directivity pattern leads to a smooth power response
 
Advanced Electronics
� Transformer balanced input stage (TIM 1) equipped with special distortion reduction crossover function
� Electronics can be remotely accessed when the cabinet is flush mounted (REK 1 and CP 2, CP 5,CP 10, CP 15, CP 20, CP 25, or CP 30)
� Integrated electronic limiter for each driver
� Hybrid class A-B amplifiers, employed for their best overall performance, are also protected
� Active three-way crossover with 24 dB/oct. slopes
� Display for power on and protect is integrated into the MMD�, together with a logo
� Controls adapt the monitor�s response to compensate for the loudspeaker�s environment:
  Bass, mid and treble controls for specific and common acoustical issues, 
  Parametric EQ for low-frequency corrections
� Accelerated Heat Tunneling� (AHT�) ensures effective amplifier cooling whether the cabinet is mounted vertically or horizontally.
� Electronics can be remotely accessed when the cabinet is flush mounted
� Electronics can be remotely powered on with two modes of operation (0 V and 12 V trigger)
� Attention to detail in design results in low self-generated noise
Acoustics

−3 dB free field frequency response

30 Hz - 24 kHz, � 3 dB

Pass band free field frequency response

32 Hz - 20 kHz, � 2 dB
Self generated noise level at 10 cm < 25 dB(A)
Total harmonic distortion < 0.5 % at 95 dB SPLat 1 m > 100 Hz
Max. SPL in full space / calc. in half space
at 3% THD at 1m
115.8 / 121.8 dB SPL
(averaged between 100 Hz and 6 kHz)
Bass capability: Max. SPL in half space 
at 3% THD at 1m
111.9 dB SPL 
(averaged between 50 Hz and 100 Hz)
Max. short term SPL with IEC-weighted noise (IEC 60286-5) at 1 m, in typical listening conditions 112 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair) 102 dB(C) SPL (full range)
110 dB(C) SPL (with subwoofer)
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair) 86 / 92 dB(C) SPL (full range)
98 / 104 dB(C) SPL (with subwoofer)
Electronics
Woofer amplifier, cont. output power(THD < 0.1%) 340 W
Woofer amplifier, peak output power 400 W
Midrange amplifier, cont. output power(THD < 0.1%) 160 W
Midrange amplifier, peak output power 190 W
Tweeter amplifier, cont. output power(THD < 0.1%) 180 W
Tweeter amplifier, peak output power 210 W
Controller design Analog, active
Crossover - Frequency 600 Hz / 2.0 kHz
Crossover - Slope 24 dB/oct
Equalization - Bass 0; -2.5; -5; -7.5 dB
Equalization - Mid 0; -1,5; -3; -4,5 dB
Equalization - High 1; 0; -1; -2 dB
Parametric Equalizer Bypassable
Parametric Equalizer - Gain +4 ... -12 dB
Parametric Equalizer - Frequency 20 ... 200 Hz
Parametric Equalizer - Q 1 ... 8
Protection circuitry Limiter: low, mid, high
Infrasonic filter: frequency/slope 15 Hz; 12 dB/oct
Input, analog
Impedance, electr. symm. XLR, 13 kΩ
Impedance, bal. floating XLR, 4.7 kΩ*
Input sensitivity -8 dBu/+6 dBu
Max. input level

+19 dBu (6.9 Vrms)

Gain Control -9 ... +6 dB
CMRR > 60 dB @ 15 kHz
Displays, indicators - power on Logo "red"
Displays, indicators - limit / clip Protect
Mains 100, 120, 230 V AC swichable
Power consumption - idle 36 VA
Power consumption - full output AC; DC 1.300 VA
Mechanics
Cabinet surface Painted
Color standard Anthracite (RAL 7021), silver (RAL 9006)
Baffle cover

Optional metal grille, removable

Drivers Magnetically shielded
Woofer 265 mm (10")
Midrange 76 mm (3")
Tweeter 25 mm (1")
Mounting points 8 x M5 on rear
Height x width x depth 645 x 330 x 444 mm (25 3/8" x 13" x 17 1/2")
Net volume internal 42 liters
Weight 36 kg (79.4 lbs)
Delivery includes 1x O 410 
1x Power cables (Euro, UK, USA) 
1x Operation manual 
1x Production certificate 
1x Product guarantee 
1x Trimmer and switch screwdriver
 

 

 
Products
Studio Monitor Systems
KH 420
O 410
KH 310D
KH 310A
KH 120D
KH 120A
M 52
KH 870
KH 810
Current Microphones
Current Accessories


 

Read our blogs