Neumann
KH 120A Active Studio Monitor |
Product Code:
KH120A
|
The KH 120 A
studio monitor is designed for use as a near-field loudspeaker or as a rear
loudspeaker in larger multi-channel systems. The KH 120 A represents the latest
in acoustic and electronic simulation and measurement technologies to ensure the
most accurate sound reproduction possible. It has a Mathematically Modeled
Dispersion waveguide (MMD (TM), flexible acoustical controls, analog class-AB
amplifiers, a large headroom analog input and an extensive mounting hardware
range. All of this provides the user with the maximum versatility over a wide
variety of acoustic conditions, source equipment, and physical locations.
The KH 120 is perfect for tracking, mixing and mastering in music, broadcast,
project and post-production studios. |
Features |
Benefits |
Powerful titanium
fabric dome |
Low-distortion high-frequency
reproduction |
Elliptical
Mathematically Modelled Dispersion™
(MMD™) waveguide |
Smoother off-axis response,
More forgiving of diverse acoustical environments |
Composite sandwich
cone |
Damping of break-up modes |
Long throw bass
driver |
Low distortions at high sound
levels |
Two-color + dimmable
Neumann logo |
Displays operation status and activation of the
extensive protection system |
Robust metal
grille |
Protects against mechanical damage |
Large front panel
ports |
Reduced bass compression and easier to mount in
tight spaces such as OB vans |
Compact aluminum
cabinet
(magnetically shielded) |
Minimizes resonances, better heat dissipation,
long life |
Wide horizontal
dispersion |
Freedom of movement across the mixing
console |
Narrow vertical
dispersion |
Reduces reflections off the mixing
console |
One-piece front panel
with no discontinuities |
Reduced diffraction and smoother frequency
response |
Powerful analog
amplifiers with large headroom |
Improved transient response |
Production
consistency |
Any KH 120 is “pair-matched” to any
other KH 120 |
4-position
bass, low-mid and treble acoustical controls |
More control in diverse acoustical
environments |
Wide range input gain
and output level controls |
Easier interfacing with signal
sources |
New mounting hardware
options |
More flexibility in mounting cabinets in more
diverse locations |
Display
dimmer |
For low lighting level conditions or behind the
screen applications |
Ground
lift |
Reduced noise in electrically noisy environments
and over-comes ground loops |
Universal
switched-mode power supply
(100 … 240 V) |
One version works in any country and robust to
poor quality mains supply |
Separate woofer and
tweeter electronic peak limiters and thermal-protection
circuitry |
High reliability |
XLR analog input / 24
bit, 192 kHz, AES3 and S/P-DIF |
Compatible with commonly used digital
signals |
BNC input and buffered
BNC output |
For flexible and trouble-free digital
interconnectivity |
|
|
|
Acoustics |
Free field frequency response |
52 Hz � 21 kHz, � 3 dB |
Pass band free field frequency response |
54 Hz � 20 kHz, � 2 dB |
Self-generated noise
(with input gain set to 100 dB for 0 dBu) |
< 20 dB(A) at 10 cm |
Total harmonic distortion < 0.5 % at 95 dB
SPL at 1 m |
> 100 Hz |
Max. SPL in full space / calc. in half space
at 3% THD at 1m |
105.1 / 111.1 dB SPL
(averaged between 100 Hz and 6 kHz) |
Bass capability: Max. SPL in half space
at 3% THD at 1m |
104.8 dB SPL
(averaged between 50 Hz and 100 Hz) |
Max. short term SPL with IEC-weighted noise
(IEC 60268-5) at 1 m, in typical listening
conditions |
107 dB(C) SPL |
Max. short term SPL with music material at
2.3 m, in typical listening conditions (pair) |
97 dB(C) SPL (full range)
104 dB(C) SPL (with subwoofer) |
Max. long term SPL with pink noise at 2.3 m,
in typical listening conditions (single/pair) |
88 / 93 dB(C) SPL (full range)
89 / 94 dB(C) SPL (with subwoofer) |
Electronics |
Woofer amplifier,
cont.(peak) output power* |
50 W (80 W) |
Tweeter amplifier,
cont.(peak) output power* |
50 W (80 W) |
Controller design |
Analog, active |
Crossover Frequency |
2.0 kHz |
Crossover Slope (dB/oct.) |
24, 4th order |
Equalization - Bass |
0, −2.5, −5, −7.5 dB |
Equalization - Mid |
0,
−1.5, −3, −4.5 dB |
Equalization
- High |
+1,
0, −1, −2 dB |
Protection circuitry |
Limiter: low, high |
Infrasonic filter frequency; slope |
30 Hz; 6 dB/oct. |
Analog
Input |
|
Impedance,
electrically balanced |
10k
Ohms in position 94/108 dB SPL at 1 m
20k Ohms in position 100/114 dB SPL at 1 m |
Input gain control (sensitivity) |
0 dB to −15 dB |
Output level control |
94, 100, 108, 114 dB SPL |
CMRR |
>56 dB @ 15 kHz |
Maximum input level |
24 dBu |
Displays and indicators - power on |
Neumann logo �White� |
Displays and indicators - limit/clip |
Neumann logo �Red� |
Mains Power Supply, voltage; frequency |
100-240 V~; 50/60 Hz |
Power consumption � Idle |
20 W |
Power consumption � Full output AC |
200 W |
Mechanics |
Cabinet surface finish, color: custom |
Painted aluminium, Anthracite (RAL 7021)
Powder-coated aluminium, White (RAL 9016) |
Operating conditions |
+10� C to +40� C (+50� F to +104� F),
<90% RH, non-condensing |
Transport/storage conditions |
−25� C to +70� C (−13� F to 158� F),
<90% RH, non-condensing |
Drivers |
Magnetically shielded |
Woofer |
130 mm (5.25�) |
Tweeter |
25 mm (1�) |
Mounting points |
2 x M8 on rear panel |
Height x width x depth, mm (inches) |
277 x 182 x 220 mm (10 7/8� x 7 1/8� x 8
5/8�) |
Internal net volume / external volume |
6.5 liters / 9.7 liters |
Weight |
6.4 kg (14.1 lbs) |
Delivery includes |
1x KH 120 A
2x Main cables (European and US version)
or 1x UK power cable
or 1x CCC certified power cable
4x Self-adhesive feet
1x Operating manual
1x Supplement "Getting Started Quickly" |
|
|
|
|
|
|
|
|