| 
			
				| 
| Neumann KH 310D Active Studio Monitor with Digital Input and Delay |  
| 
 Product Code:
KH310D
 
  
  |  
| 
| 
| The KH 310 D three-way active tri-amplified 
monitor features a Mathematically Modeled Dispersion� Waveguide (MMD�), flexible 
acoustical controls, various input options (analog and digital) and an extensive 
range of mounting hardware. This allows the loudspeaker to be used in diverse 
acoustical conditions, with any source equipment and in a wide variety of 
physical locations. The KH 310 represents the latest in acoustic and electronic 
simulation and measurement technologies to ensure the most accurate sound 
reproduction possible.The KH 310 D is designed for use as a near-field monitor, 
as a front loudspeaker in mid-sized multi-channel systems, or as a rear 
loudspeaker in a larger multi-channel system. It can be used in project, music, 
broadcast centers, OB vans, and post production studios for tracking, mixing, 
and mastering. |  
| 
	
		| Product Feature | Benefit to the 
		Customer |  
		| 
			
				| Powerful alloy 
				fabric dome |  | Low-distortion 
		high-frequency reproduction |  
		| 
			
				| Elliptical 
				Mathematically Modeled Dispersion� (MMD�) waveguide, with wide 
				horizontal and narrow vertical dispersion 
 |  | Smoother off-axis response, More forgiving of diverse acoustical environments
 Freedom of movement across the mixing console
 Reduces reflections off the mixing console
 |  
		| 
			
				| New in-house 
				simulated drivers |  | Latest modeling techniques 
		used to minimize non-linear (intermodulation) distortion |  
		| 
			
				| Fabric dome, 
				neodymium magnet, midrange driver |  | Dedicated driver reproduces 
		important midrange frequencies, which is especially important for speech 
		and vocals Light weight dome has better transient response and less breakup modes 
		than cone designs
 High power magnet reduces harmonic and intermodulation distortion
 |  
		| 
			
				| Long throw composite 
				sandwich cone bass driver with Extremely Linear Force Factor� (ELFF�) 
				and ribbed surround |  | Damping of break-up modes 
		and low distortion at high sound levels Linear pistonic motor gives a very low harmonic distortion even at high 
		excursions
 Reduced radial break-up modes on the ribbed surround
 |  
		| 
			
				| Two-color + dimmable 
				Neumann logo |  | Displays operation status 
		and activation of the extensive protection system Dimmable for low lighting level conditions or behind the screen 
		applications
 |  
		| 
			
				| Compact sealed 
				three-way cabinet design (magnetically shielded) |  | No standing wave resonances Fastest bass transient response
 Reduced intermodulation distortion in midrange
 |  
		| 
			
				| One-piece front 
				panel with no discontinuities |  | Reduced diffraction and 
		smoother frequency response |  
		| 
			
				| Powerful analog 
				class AB amplifiers withlarge headroom |  | Improved transient response |  
		| 
			
				| Independent thermo 
				limiters for woofer, midrange dome and tweeter to protect the 
				voice coils. Woofer  clip and excursion limiters |  | Fast acting, high 
		reliability and allows extraction of the maximum performance from the 
		system |  
		| 
			
				| Production 
				consistency due to individual hand-alignment in final test |  | Any KH 310 is �pair-matched� 
		to any otherKH 310 |  
		| 
			
				| 4-position bass, 
				low-mid and trebleacoustical controls |  | More control in diverse 
		acoustical environments |  
		| 
			
				| Wide range input 
				gain and output level controls |  | Easier interfacing with 
		signal sources |  
		|  | Reduced noise in 
		electrically noisy environments and over-comes ground loops |  
		| 
			
				| Digital XLR and BNC 
				inputs and buffered BNC output |  | For flexible and 
		trouble-free digital interconnectivity (24 bit, 192 kHz, AES3 and 
		S/P-DIF) |  
		| 
			
				| Lipsync delay (0 ... 
				10/12 frames) |  | To align audio and video 
		signals |  
		| 
			
				| Time-of-flight delay 
				(0 ... 400 ms) |  | To compensate for listening 
		distance differences |  
		| 
			
				| Universal 
				switched-mode power supply(100 � 240 V) |  | One version works in any 
		country and robust to poor quality mains supply |  
		| 
			
				| Extensive mounting 
				hardware options |  | More flexibility in mounting 
		cabinets in more diverse locations and backwards compatibility with 
		previous models |  
		| 
			
				| Optional robust 
				metal grille |  | Can be used, if required, to 
		protect the drivers |  
		| 
			
				| Optional 
				transportation accessories |  | Stylish  carry bag with 
		space for cables Robust wooden flight case
 |  |  
| 
			
				
			
			
				| Acoustics |  
				| Free field frequency response | 34 Hz - 21 kHz, � 3 dB |  
				| Pass band free field frequency response | 36 Hz - 20 kHz, � 2 dB |  
				| Self-generated noise (with input gain set to 100 dB for 0 dBu)
 | < 20 dB(A) at 10 cm |  
				| Total harmonic distortion < 0.5 % at 95 dB SPLat 1 m | > 85 Hz |  
				| Max. SPL in full space / calc. in half space at 3% THD at 1m
 | 110.3 / 116.3 dB SPL (averaged between 100 Hz and 6 kHz)
 |  
				| Bass capability: Max. SPL in half space at 3% THD at 1m
 | 104.5 dB SPL (averaged between 50 Hz and 100 Hz)
 |  
				| Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 
				m, in typical listening conditions | 113 dB(C) SPL |  
				| Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair)
 | 100 dB(C) SPL (full range) 107 dB(C) SPL (with subwoofer)
 |  
				| Max. long term SPL with pink noise at 2.3 m, in typical 
				listening conditions (single/pair) | 93 / 99 dB(C) SPL (full range) 94 / 100 dB(C) SPL (with subwoofer)
 |  
				| Electronics |  
				| Bass / Midrange / Treble Class AB amplifiers, cont. (peak) 
				output power* | 150 W (210 W) / 70 W (90 W) / 70 W (90 W) |  
				| Controller design | Analog, active |  
				| Crossover frequencies | 650 Hz / 2 kHz |  
				| Crossover slope | 24 dB/oct, 4th order |  
				| Equalization - Bass | 0, −2.5, −5, −7.5 dB |  
				| Equalization - Low Mid | 0, −1.5, −3, −4.5 dB |  
				| Equalization - Treble | +1, 0, −1, −2 dB |  
				| Protection circuitry | Independent thermo limiters for woofer, midrange dome and 
				tweeter. Woofer  clip and excursion limiters |  
				| Infrasonic filter - frequency; slope | 15 Hz; 6 dB/oct |  
				| Input | ![]() XLR, 
				analog electronically balanced |  
				| Impedance, electrically balanced | > 13k Ohms |  
				| Input gain control 
				(sensitivity) | 0 dB to −15 dB |  
				| Output level control | 94, 100, 108, 114 dB SPL |  
				| CMRR | > 56 dB @ 100 - 15 kHz |  
				| Max. analog input level | +24 dBu (+18 dBu for analog delayed) |  
				| Displays and indicators - power on | Neumann logo �White� |  
				| Displays and indicators - limit / clip | Neumann logo �Red� |  
				| Mains Power Supply, voltage; frequency 
 | 100-240 V~; 50/60 Hz |  
				| Power consumption - idle | 30 W |  
				| Power consumption - full output | 300 W |  
				| Digital Input/Output |  
				| Format BNC | AES3, S/P-DIF |  
				| Impedance BNC, unbalanced | 75 Ω (input/output) |  
				| Format XLR | AES3 |  
				| Impedance XLR, balanced | 110 Ω (input) |  
				| Input switching | Analog, Digital A, Digital B, Digital A+B (all available with 
				and without delay) |  
				| Digital converter: resolution, design | 16 ... 24-bit DAC, Δ∑ |  
				| Digital converter: sampling rate | 32 ... 192 kHz |  
				| Digital sensitivity | -18 dBFS |  
				| D-A dynamic range | 120 dB |  
				| Audio-Video/lip sync and Time-of-Flight delay range | 0 ... 409.5 ms |  
				| Audio-Video/lip sync max. frames | 
				0 ... 10.2 (40 ms) frames, 0 ... 12.3 (33 ms) frames
 |  
				| Resolution: time/distance | 0.1 ms / 3.4 cm ( 1 3/8") |  
				| Latency D-A (A-D-A) | 0.22 - 1.85 ms (0.54 ms) |  
				| Mechanics | ![]() |  
				| Cabinet surface finish, colour | Painted wood and polyurethane, Anthracite (RAL 7021).
 Aluminum electronics panel, Black.
 |  
				| Baffle cover | Optional removable metal grille |  
				| Operating conditions | +10� C to +40� C (+50� F to +104� F), <90% RH, non-condensing
 |  
				| Transport/storage condition | −25� C to +70� C (−13� F to 158� F), <90% RH, non-condensing
 |  
				| Drivers | Magnetically shielded |  
				| Woofer | 210 mm (8 1/4") |  
				| Midrange | 75 mm (3") |  
				| Tweeter | 25 mm (1") |  
				| Cabinet design | Sealed |  
				| Mounting points | 2 x M8 on side panels, depth from outside of cabinet 25 mm (1�). Rear panel screws for attaching LH 
				41 base 
				plate.
 Rear panel bracket.
 |  
				| Product dimensions (height x width x depth), mm (inches)
 | 253 x 383 x 292 mm (10" x 15 1/8" x 11 1/2")
 |  
				| Net volume, internal / external | 16.2 liters / 28.3 liters |  
				| Product weight | 13.1 kg (28 lbs 14 oz) |  
				| Packed dimensions (height x width x depth), mm (inches)
 | 590 x 380 x 360 mm (23 1/4" x 15" x 14 1/8")
 |  
				| Packed weight and cube | 16.9 kg (37 lbs 4 oz), 0.081 m� |  
				| Delivery includes | 1x KH 310 D 3x Cables (European, UK and US)
 4x Self-adhesive feet
 1x Operating manual
 1x Supplement "Getting Started Quickly"
 |  |  
|  |  |  |    |  
				|  |  |  |