|
Neumann TLM 102
Studio Microphone |
|
Product Code:
TLM102
|
The reduced
overall size contributes to an exceptionally compact appearance, which unites
all of the typical design components of a Neumann microphone. The harmonious
proportions and gleaming grille ring ensure that even at first glance, the TLM
102* attracts attention.
The TLM 102 is impressive in terms of sound: In the interior is a newly
developed large-diaphragm capsule (cardioid) with a maximum sound pressure level
of 144 dB, which permits the recording of percussion, drums, amps and other very
loud sound sources, for example. Instruments that are not especially loud also
benefit from the very fast transient response of the TLM 102. However its most
important applications are in the realm of vocals and speech; a slight boost
above 6 kHz provides for excellent presence of the voice in the overall mix. Up
to 6 kHz the frequency response is extremely linear, ensuring minimal coloration
and a clearly defined bass range. The capsule has an elastic suspension for the
suppression of structure-borne noise. A pop screen integrated into the grille
serves to suppress plosives in vocal and speech recording.
Due to its price and flexible field of application, the TLM 102 is ideal for the
home recording and project studio sector, as well as for the broadcasting area,
especially when clear lines of sight to the speakers are a priority.
The TLM 102 is available in black and nickel; a stand mount is included. |
�
Large-diaphragm microphone with cardioid directional characteristic (pressure
gradient transducer)
� Compact, characteristic but smaller-scale Neumann design
� Very high maximum sound pressure level
� Slight presence boost above 6 kHz
� Transformerless circuitry |
| Acoustical operating
principle |
Pressure gradient transducer |
| Directional pattern |
Cardioid |
| Frequency range |
20 Hz ... 20 kHz |
| Sensitivity at 1 kHz into 1
kohm |
11 mV/Pa |
| Rated impedance |
50 ohms |
| Rated load impedance |
1 kohms |
| Equivalent noise level, CCIR |
21 dB |
| Equivalent noise level,
A-weighted |
12 dB-A |
| Signal-to-noise ratio, CCIR (rel. 94 dB
SPL) |
73 dB |
| Signal-to-noise ratio, A-weighted (rel. 94
dB SPL) |
82 dB |
|
Maximum SPL for THD
0.5% |
144 dB |
| Maximum output voltage |
13 dBu |
| Dynamic range, A-weighted |
132 dB |
| Supply voltage (P48, IEC
61938) |
48 V ± 4 V |
| Matching connector |
XLR3F |
| Weight |
approx. 210 g |
| Diameter |
52 mm |
| Length |
116 mm |
|
|
|
|
|
|
| |
|
|
