|
|
|
GLIDECAM 4000PRO + X10 - Discontinued |
|
Description:
Comes with Glidecam
4000
PRO + X10
Glidecam 4000 Pro is a hand-held camcorder stabilizing system
designed for cameras weighing from 4 to 10 pounds (1.8-4.5kg).
The Glidecam X-10 Support Vest is lightweight, comfortable and can
be adjusted to fit a wide range of operators. High endurance, dual
density, EVA foam padding and integral T6 aluminum alloy create a
vest which can hold and evenly distribute the weight of the system
across the operator's shoulders, back, and hips. For safety, quick
release, high impact buckles allow the vest to be removed
quickly.
The Vest’s outer shell is made of 1000 denier cordura fabric,
and 7-panel seat belt strapping, noted as being the best in the
industry.
The Glidecam X-10 Support Vest incorporates a unique and
proprietary Arm-to-Vest Connector that allows the angle of the
Support Arm to be adjusted relative to the Support Vest. This
Trimming Mechanism allows you to neutralize the weight of the
Support Arm relative to your body’s center of gravity. When
set correctly the effort required while shooting is greatly
reduced. Another unique and proprietary feature of the Arm-to-Vest
Connector is that it allows the Support Arm to be attached and
removed from the Vest without affecting the operator’s
selected trim settings.
|
Product Code: 4000Pro / X10
Please refer to new model
XR-4000
|
|
|
|
|
General
Specifications
The GLIDECAM X-10’s Dyna-Elastic™ Dual-Articulating
Support Arm incorporates
38 precision radial bearings within its machined T6 aluminum
structure. The
placement and implementation of these double-shielded bearings
produce minimal
friction and allow the Dyna-Elastic™ Support Arm to pivot and
boom very
smoothly, and with virtually no noise.
Four high-carbon alloy, Extension Springs are employed within the
Support Arm’s
hardcoat anodized Exo-Skeletal Shells. Utilizing Class Three
Levers, the energy of
the Extension Springs acts upon internal Fulcrum Points, and
provides the Support
Arm with its lifting power. The spring tension is field adjustable
and allows for
varying camera weights.
Our proprietary spring Inter-X-Change™ system makes the
installation and
removal of the springs quick and easy. The Support Arm can be setup
and used in
either a Two-Spring Mode, or a Four-Spring Mode. In the Two-Spring
Mode, the
Support Arm can hold a total combined camera and hand-held
stabilizer weight of
9 pounds. In the Four-Spring Mode, the Support Arm can hold a total
combined
camera and hand-held stabilizer weight of 18 pounds.
A key design feature of the Support Arm is that it incorporates our
Light-Force™
technology. This literally means that only a "light" force or
effort is required by the
operator to hold the arm at any given position, or to boom the arm
up and down. It
is this Light-ForceTM feature that provides the operator with the
optimum amount
of camera buoyancy or float. |
Home
Back to
Top
|
|
