Accessories

Discontinued

• The Glidecam Gold Series Low Mode Cage allows you to configure your Glidecam Gold System for Low Mode photography. This allows you to capture dynamic shots with the camera placed near to the ground.

Discontinued

• For use with the Gold Arm and Gold Low Mode Mount/Cage

Discontinued

• Titanium Socket Block for the Gold Arm

Discontinued

Discontinued
 

• Vehicle Mount for Gold Arm

Discontinued
 

• For use with Glidecam Gold Series, includes socket block

Discontinued

• For use with the V-25 Arm and V-25 Low Mode mount

• THE LOW MODE CAMERA MOUNT can be expanded and contracted both verticaly and horizontaly allowing a wide range of cameras to mount inside.

• THE SLED OFFSET ADAPTER allows the curved gimbal handle to attach lower on the endnof the dyna-elastic arm. This allows the sled to be lower than normal when shooting in the Low Mode configuration, and it also allows the gimbal tube to be attached upside down, both which are needed for reasons of clearance. The Sled Offset Adapter can also be used to lower the sled height when you are not shooting in the Low Mode configuration.

• The Vista Post is 33" tall and allows the central support post to be expanded to a maximum of approximatly 5 feet in length. this expanded post length allows for very low or high camera placement.

Discontinued

• The VEHICLE MOUNT allows you to mount th Dyna-Elastic arm to various vehicles or platforms.

• This photograph shows the Low Mode Accesories in use. A 16mm film camera is shown mounted inside the Low Mode Camera Mount, the Vista Post is attached to the central support post, and the curved gombal handle is connected to the Sled Offset Adapter.

 

Discontinued
 

• Includes Vehicle Mount, Low Mode Mount, Sled Offset Adapter, and Vista Post

Discontinued

• The Glidecam V-8 Low Mode Accessory allows you to configure your Glidecam V-8 system for Low Mode photography. This allows you to capture dynamic shots with the camera placed near to the ground.
• NOTE: The V-16/V-20 Offset Adapter Set and Vehicle Mount may also be used with the V-8 system.

• An accessory that allows you to securely dock and balance your hand-held stabilizer. This docking bracket will work with the Glidecam 2000 Pro, 4000 Pro, HD-1000, HD-2000 and HD-4000. Attaches securely on top of an industry standard C-Stand with 5/8" post. (C-Stand not included)

Discontinued

The Glidecam Low Mode FX Package Includes:

• (1) Handle Clamp
• (1) Telescoping Post (16" in Length)
• (1) Extension Tube (12" in Length)
• Mounting Hardware

• Glidecam Body-pod is a lightweight, rigid support system which, when used with either the Glidecam 2000 Pro, or 4000 Pro hand-held stabilizers, allows all the weight of the system to be supported by your body. The Body-pod allows you to shoot in cushioned comfort for indefinite periods of time. It takes the stabilizer's weight out of your hands and arms and displaces the weight onto your waist and shoulders. Stress and fatigue are virtually eliminated, allowing you the freedom to shoot events that require uninterrupted shooting. The Glidecam Body-pod is designed to allow you to quickly slide the handle of either the 2000 Pro, or 4000 Pro on and off its rigid support, so you can quickly switch back and forth between hand-held stabilization shooting and body mounted shooting.
• Since the support of the Body-pod is rigid and for the most part inflexible, it will not absorb and smooth out camera movements as well as a stabilizer which is being held in just your hands. However, shooting with your stabilizer attached to the rigid support of the Body-pod still yields results that are far better than unstabilized, hand-held shooting or shoulder supported shooting. Once you get used to using the Glidecam Body-pod, you won't want to shoot anything without it.

• The Glidecam Forearm Support Brace is the first camera stabilization system designed to distribute the weight of the system over the entire forearm of the operator. The weight of the system is supported evenly by our exclusive and unique exoskeletal forearm support brace. This forearm brace not only provides the operator with cushioned comfort while shooting, but also eliminates the torque, which would otherwise cause stress on the operator's wrist. With the forearm support brace, shooting smooth and professional looking images occurs naturally, for the Glidecam system is now truly an extension of the human body. The Glidecam Forearm Support Brace works with both the Glidecam 2000 Pro and the Glidecam 4000 Pro.

Discontinued
 

• 5 LED battery life indicator (push button to check remaining battery life)
• Charging interface cable with LED indicator (Red-charging / Green-fully charged)
• Battery has integral 1/4”-20 screw and bottom thread-mount for sandwiching battery between L4-PRO monitor and on-camera swivel shoe mount (also enables double stacking of batteries).
• Dual-purpose AC adapter for charging battery (with interface cable) or for powering L4-PRO monitor directly from AC socket.

Discontinued

• Tilt/Swivel Bracket for the L7-Pro monitor – Included with the Glidecam L7-Pro

Discontinued

• Smart Phone Accessory (iPhone and Droid 2)