The Glidecam Eclipse monitor is ideal for use wherever a
professional daylight viewable monitor is required. The Eclipse
works perfectly when used on the Glidecam v-16, V-20, or Gold Sled.
The Glidecam Eclipse can also be adapted to attach to other
industry standard camera stabilizer sleds. Weighing approx. 5.4
pounds, and easily powered by an external 12 Volts DC battery or
power supply, the Eclipse can also be used as an oversized daylight
readable viewfinder or set monitor and can be attached virtually
anywhere. |
Product Code:
Eclipse
(Discontinued)
|
SPECIFICATIONS
- DISPLAY: 5.5 inch High Performance CRT, Daylight
viewable, High Intensity, P43 (phosphor #43) Green Screen
Monitor
- INPUT SIGNAL: One Composite Video input (NTSC or
PAL via switch)
- FRONT PANEL CONTROLS: Power On/Off, Brightness,
Contrast
- REAR PANEL: One 4 pin XLR male Power In. Two 4 pin
XLR female Power Out passthroughs. One BNC video input. NTSC/PAL
switch. 4:3 ratio switch. Video Termination
Switch.
- EXTERNAL SUPPLY VOLTAGE: 9-30 Volts DC at 700 mA
to 1.5 A max. approx.
- TYPICAL CRT LIFE: 20,000 hours.
- OPERATING TEMPERATURES: 1 degree Celsius to 55
degrees Celsius.
- OPERATING ALTITUDE: -1,300 ft. to 15,000
ft.
- OPERATING HUMIDITY: 0 to 90%
non-condensing.
- SIZE: 6"W x 6" H x 6"D.
- MOUNTING HOLES: Four #10/32 threaded mounting
inserts are located on the base so a variety of mounting adapter
plates can be attached. (Please ask your Glidecam dealer for info
on these adapter plates).
- WEIGHT: 5.4 pounds approximate.
- STRUCTURE: Aluminum cabinet with Black
finish.
- Electrical cables, adapters, mounting bracket(s),
and sled adapters not included. (The Eclipse does come with the
adapter plate which allows it to be connected to the base platform
of the V-16 and V-20.)
|
