SHURE Pro Audio Equipment - Performance Microphone Beta 98H/C

The Beta 98H/C™ and the wireless version WB98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

Features

The Beta 98 H/C and WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.
The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)
The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters
Tailored frequency response for open, natural sound reproduction
Compact, lightweight construction provides a low degree of visibility
Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
Legendary Shure ruggedness and reliability
Interchangeable replacement cartridges:
RPM108 : Cardioid
RPM110 : Supercardioid

Specifications

Specifications	WB98H/C Microphone (with standard test circuit shown in User Guide Figure 1)	BETA 98H/C Microphone (with preamplifier)
Type	Condenser (electret bias)
Polar Pattern	Unidirectional (cardioid)
Frequency Response	20 to 20,000 Hz
Output Impedance	1200 ohms	Rated at 150.0 ohms (actual) Recommended minimum load impedance: 1 kilohm. May be used with loads as low as 150 ohms with reduced clipping level.
Output Level (0 dB = 1 volt per Pascal)	Open Circuit Voltage: -56.5 dB (1.5 mV)	Open Circuit Voltage: -56 dB (1.6 mV)
Output Clipping Level (at 1kHz, THD < 1%)	-9 dBV (0.35 V)	2.5 kilohm load: 11 dBV (3.5 V) 1.0 kilohm load: 3 dBV (1.4 V)
Maximum SPL	143.5 dB	2.5 kilohm load: 163 dB 1.0 kilohm load: 155 dB
Dynamic Range (maximum SPL to A-weighted noise level)	112.5 dB	132 dB (2.5 kilohm load)
Signal-to-noise ratio	63 dB at 94 dB SPL (IEC 651)
Polarity	Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground).	Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector.
Recommended Operating Voltage	5 V (pin 2 to pins 3 and 4)	11 to 52 Vdc Phantom
Environmental Conditions	Operating temperatures: -7 degrees C to 49 degrees C (20 degrees F to 120 degrees F) Storage temperatures: 29 degrees C to +74 degrees C (-20 degrees F to 165 degrees F) Relative Humidity: 0 to 95%
Net Weight	Microphone w/cable and mini-connector (TA4F): 65 g (2.3 oz.)	Microphone w/cable and preamplifier: 156 g (5.5 oz.)

SHURE Beta 98H/C Microphone Performance Microphones

SHURE
Beta 98H/C Microphone Performance Microphones