|
|
|
Beta 56A Instrument Microphone |
|
|
Product Code:
Beta 56A
|
The Shure Beta 56®A
microphone has a frequency response specifically tailored for drums
and instruments. Its extremely uniform supercardioid pickup pattern
provides high gain-before-feedback and excellent rejection of
unwanted noise.
A
built-in dynamic locking stand adapter with an integral XLR
connector simplifies installation. The stand adapter keeps the
microphone securely in place, even if it is struck by a drumstick.
Typical Beta 56A applications include close miking of tom-toms and
other percussion instruments, as well as guitar amplifiers, brass
instruments, and woodwinds.
|
|
| Features |
- Tailored frequency response
provides drums, amplified instruments, and horns with studio
quality sound
- Built–in stand adapter
with dynamic locking system and XLR connector simplifies setup and
provides greater flexibility
- Uniform supercardioid pattern
for high gain-before-feedback and superior rejection of
off–axis sound
- Compact design reduces stage
clutter
- Hardened steel mesh grille
resists wear and abuse
- Neodymium magnet for high
signal–to–noise ratio output
- Minimally affected by varying
load impedance
- Advanced pneumatic shock mount
system that minimizes transmission of mechanical noise and
vibration
- Legendary Shure quality and
reliability
|
|
| Specifications |
-
Type: Dynamic(moving coil)
-
Polar
Pattern : Supercardioid, rotationally symmetrical about microphone
axis, uniform with frequency
-
Output
Level (at 1,000 Hz) : Open Circuit Voltage -51 dBV/Pa (2.8 mV)
(1 Pa = 94 dB SPL)
-
Impedance : Rated impedance is 150 ohms (290 ohms actual) for
connection to microphone inputs rated low Z
-
Polarity
: Positive pressure on diaphragm produces positive voltage on pin 2
with respect to pin 3
-
Connector : Three-pin professional audio connector (male XLR
type)
-
Case :
Silver blue enamel-painted die cast metal with hardened,
matte-finished steel mesh grille
-
Adjustable, Locking Stand Adapter : Integral, dynamic locking,
adjustable through 180 degrees with standard 5/8"-27 thread
-
Net
Weight : 468 grams (16.7 oz)
|
|
|
