|
The IR-CS system consist of:
IRR-106x1,IRH-56x6,IRD-66x4,AMC-006
IRR-106
Technical Specs:
The IRR-106 is the
heart of the Azden 6-Channel IR Conference System. Using IR to
wirelessly transmit, the system provides instant security, as IR
will not penetrate wlls and can not be "scanned". Additionally,
setup is a snap since no wires are required between the microphones
and the receiver.
The receiver provides 6 individual output connectors, plus an
additional "mixed" output - all with volume control per channel. As
many as four external IR sensors can be attached to the rear of the
receiver assuring you of great coverage, even in large rooms.
The IRR-106 can be "rack-mounted" using the inculded rack ears and
is powered by a small, external power supply.
Sub-carrier Frequency: 2.00 MHz - 3.00 MHz
Type: Super Heterodyne
Mondulation: FM
Reception Sensitivity: >25 dB µV
Reception Selectivity: ± 2 kHz
Audio Output Adjustment: Mic = -20 dB max
Line = 0 dB max
Audio Output Impedence: Mic = <1.5 k ohms
Line = <1 k ohms
Power Requirement: 12 VAC 50-60 Hz
Dimensions: 465 W x 270D x 44H mm (18.3 x 10.62 x 1.57
inches)
IRH-56
Technical Specs:
The
perfect handheld "pass-around" microphone for, this 6-channel
switchable microphone/transmitter, operates with Azden's 6-channel
conference system. It is powered by two "AA" batteries (Alkaline or
rechargeable (1HR-3U only)).
Sub-carrier frequencies: 2.00 MHz - 3.00 MHz switchable
Modulation: FM
Microphone element type: Uni-directional dynamic
Frequency Response: 50-9 kHz ±3dB
Battery type: 2-“AA” Alkaline (1.5V x 2 ) or
2-1HR-3U “AA” rechargeable Ni-MH (1.2V x 2 )
Battery life: > 8 hours w/alkaline batteries
Size: 9.65" x approx.1.375" (245 x approx. 35mm)
Weight: 9.1oz (258g) w/alkaline batteries)
IRD-66
Technical Specs:
The
IRD-60 is an externally mounted infrared sensor that is used with
the IRR-106 receiver. The sensor is fitted with an "F" connector
and comes with a ceiling mounting bracket
AMC-006
Technical Specs:
6CH charger for IRH-56
|
