| Azden Microphone Parts |
 |
LC-1
Lapel Mic Clip
Replacement
Lapel mic clip for the EX-503 (H), EX-505 (H), and EX-503L (H)
lavalier mics. This is the clip that replaces the one that comes
with the WM-PRO and all other Azden systems that come with an Azden
lavalier microphones.
|
 |
EX-50H Lavalier
Microphone
High Performance Omni-Directional lavalier microphone with HIROSE
connector for 1201BT and 2000BT.
|
|
Model:
LC-1 |
Email Us
|
Model: EX-50H |
Azden
EX-50H Lavalier Microphone">Email
Us
|
 |
 |
EX-50L Lavalier
Microphone
High Performance Omni-Directional lavalier mic with lock-down mini
jack - for 15BT, 35BT and 32BT.connector.
|
 |
ECM-44 Microphone
Replacement microphone - ECM-44, Sony omni-lapel
microphone with a wired 3.5mm plug. This electret condenser
microphone requires a bias voltage of 5-9VDC which all Azden
bodypack transmitters provide.
|
|
Model: EX-50L |
Azden
EX-50L Lavalier Microphone">Email
Us
|
Model:
ECM-44 |
Email Us
|
|
|
|
ECM-44H Microphone
Replacement microphone - ECM-44H, Sony omni-lapel microphone with a
wired 4-pin connector for most UHF body-pack transmitters. This
electret condenser microphone requires a bias voltage of 5-9VDC
which all Azden bodypack transmitters provide.
|
 |
EX-413 Omni hand-held Mic
Replacement microphone - EX-413 omni hand-held
microphone with a wired 3.5mm plug.
|
|
Model:
ECM-44H |
Email Us
|
Model:
EX-413 |
Email Us
|
|
 |
EX-503
Omni lapel Mic
Replacement microphone - EX-503 omni lapel microphone with 3.5mm
plug. This electret condenser microphone requires a bias voltage of
5-9VDC which all Azden bodypack transmitters
provide.
|
 |
EX-503H Omni lapel Mic
Replacement microphone - EX-503H omni lapel microphone with a 4-pin
connector for most UHF bodypack transmitters (not the 10BT which
uses the EX-503 with 3.5mm connector). This electret condenser
microphone requires a bias voltage of 5-9VDC which all Azden
bodypack transmitters provide.
|
|
Model:
EX-503 |
Email Us
|
Model:
EX-503H |
Email Us
|
|
 |
EX-503L Lavalier Microphone
The same as the EX-503, but with a screw-down locking
connector. Designed to be used with the 10BT, 15BT, 30BT, 35BT and
32BT bodypack. This electret condenser microphone requires a bias
voltage of 5-9VDC which all Azden bodypack transmitters
provide.
|
|
EX-505U Lavalier
Microphone
Replacement microphone - EX-505U, uni-directional lapel microphone
wired with a 3.4mm plug. This electret condenser microphone
requires a bias voltage of 5-9VDC which all Azden bodypack
transmitters provide. |
|
Model:
EX-503L |
Email Us |
Model:
EX-505U |
Email Us |
|
|
|
EX-505UH Lavalier
Microphone
Replacement microphone - EX-505UH, uni-directional lapel microphone
wire with a 4-pin connector for most UHF body-pack transmitters.
This electret condenser microphone requires a bias voltage of
5-9VDC which all Azden bodypack transmitters
provide. |
[Image not
Available] |
Ball-screen
Replacement microphone ball-screen for 31HT |
|
Model:
EX-505UH |
Email Us |
Model:
Ball-screen |
Email Us |
|
|
[Image not
Available] |
Ball-screen
Replacement microphone ball-screen for 41HT and
51HT.
|
[Image not
Available] |
Ball-screen
Replacement microphone ball-screen for WM/T-PRO
|
|
Model:
Ball-screen |
Email Us
|
Model:
Ball-screen |
Email Us
|
|
|
[Image not
Available] |
Switch-cover
Replacement On/Off switch cover for 31HT
|
[Image not
Available] |
Switch-cover
Replacement On/Off switch cover for 51HT and 41HT.
|
|
Model:
Switch-cover |
Email Us
|
Model:
Switch-cover |
Email Us
|
|
|
[Image not
Available] |
Switch-cover
Replacement On/Off switch cover for WM/T-PRO
|
 |
SMH-1 Shoe
Mount
Replacement shotgun accessories - SMH-1 fits the SGM-1X, SGM-2X and
SGM-1000.
|
|
Model:
Switch-cover |
Email Us
|
Model:
SMH-1 |
Email Us
|
|
 |
SMH-2
Shoe-Mount
Replacement shoe-mount for SGM-X, SGM-PDII, SGM-3416, SGM-3416L and
SMX20.
|
|
SMH-3
Shoe-Mount
Replacement shoe-mount for ECZ-990 and the SMX-10
|
|
Model:
SMH-2 |
Email Us
|
Model:
SMH-3 |
Email Us
|
|
 |
|
[Image not
Available] |
Battery
holder
Replacement battery holder for the SGM-X
|
[Image not
Available] |
Extension
barrel
Replacement extention barrel for SGM-2X. Needed to use the
microphone as a super-cardiod shotgun.
|
|
Model: Battery
holder |
Email Us
|
Model: Extention
barrel |
Email Us
|
|
|
[Image not
Available] |
Omni
barrel
Replacement short omni-directional barrel for the
SGM-2X.
|
[Image not
Available] |
Rubber
ring
Replacement shotgun accessories -Replacement rubber rings for the
SMH-1. Package of 2
|
|
Model: Omni
barrel |
Email Us
|
Model: Rubber
ring |
Email Us
|
|
|
[Image not
Available] |
Windscreen
Replacement windscreen for CM-20 and/or CM-20H.
|
[Image not
Available] |
Windscreen
Replacement windscreen for EX-503, EX-503H, EX-503L, EX-505U,
EX-505UH, HS-9 and HS-9H.
|
|
Model:
Windscreen |
Email Us
|
Model:
Windscreen |
Email Us
|
|
| [Image not Available] |
Windscreen
Replacement windscreen for SGM-2X (short).
|
 |
WS-16 Windscreen
Replacement windscreen for SGM-3416 and any standard
microphone barrel up to 5".
|
|
Model:
Windscreen |
Email Us
|
Model: WS-16 |
Azden WS-16
Windscreen">Email
Us |
|
|
|
WS-16L
Windscreen
Replacement windscreen for the SGM-3416L and standard microphone
barrel up to 8".
|
 |
WS-PD Windscreen
Replacement windscreen for SGM-PDll and all standard microphone
barrels up to 4".
|
| Model:WS-16L |
Azden WS-16L
Windscreen">Email
Us |
Model: WS-PD |
Azden WS-PD
Windscreen">Email
Us |
|
 |
WS-SGM
Windscreen
Replacement windscreen for SGM-1000, SGM-1X, SGM-X and all standard
microphone barrels up to 7".
|
 |
WS-SGML
Windscreen
Replacement windscreen for SGM-1000, SGM-1X, SGM-X and all standard
microphone barrels up to 7".
|
| Model: WS-SGM |
Azden WS-SGM
Windscreen">Email
Us |
Model: WS-SGML |
Email Us
|
|
|
|
WS-SLR
Windscreen
Replacement windscreen for SMX-10 and ECZ-990
|
 |
SWS-100
Windshield
High Performance Softie Wind-Shield for the
SGM-PDII, SMX-10, ECZ-990 and and standard 5" microphone
barrel.
|
| Model: WS-SLR |
Azden WS-SLR
Windscreen">Email
Us |
Model: SWS100 |
Azden SWS-100
Windshield">Email
Us |
|
 |
SWS-200 Windshield
High
Performance Softie Wind-Shield for the SGM-1000, SGM-1X, and SGM-X.
Also compatible with the SGM-PDII, SMX-10, ECZ-990 and any standard
8" microphone barrel.
|
|
|
| Model: SWS200 |
Azden SWS-200
Windshield">Email
Us |
|
|
|
|
Home > AZDEN > Microphone
Parts
