The IR-CS system consist of:
IRR-40x1,IRH-15cx1,IRN-20x1,IRD-60x1,Celing x 4, IHR-3U x 4
IRR-40
Technical Specs: IRR-40 is top class of audio receipt in the
industry. Newly launch IRR 40P along 20wat amplifier facture and
lour speaker port based on
IRR 40. Al1 Azden advanced know how for high quality lR wireless
microphone introduces new generation receiver
family.
-
Simultaneously using two channel
-
Built
in amplifier up to 20w 0RR-40P)
-
Four
speaker connection ([RR-40P)
-
Remote volume control
-
Audio
fading feature for microphone user priority
IRR-40/IRR-40P
Sub-carrier
Frequency
2.06MHz&2.56MHz
Type
Super Heterodyne
Modulation
FM
Reception
channel
2 channel
Pilot tone
signal
38.4Hz
Frequency Response/Deviation 50-10kHz±3dB /
less than 1%
Audio
Output
RCA JACK(MONO)X2
Speaker out
(IRR-40P)
5W (MONO)X4.4Ω
Line
input
RCA JACK(L.R)X2
Sensor
input
F type connector X 3
Power
DC 15V
Power
consumption
0.3A(IRR-40) / 1.2A(IRR-40P)
Dimensions
204(W)X44(H)X210(D)
Weight
1.3kg(IRR-40) / 1.5kg(IRR-40P)
IRH-15c
Technical Specs: The perfect handheld "pass-around"
microphone for student participation, this dual channel
microphone/transmitter, operates on the channel that the teacher is
not using. It is powered by two "AA" batteries (Alkaline or
rechargeable (1HR-3U only)) and is compatible with all Azden
infrared models.
Sub-carrier frequencies: 2.06MHz & 2.56MHz switchable
Modulation: FM
Microphone element type: Uni-directional dynamic
Frequency Response: 50-8kHz ±3dB
Battery type: 2-“AA” Alkaline (1.5V x 2 ) or
2-1HR-3U “AA” rechargeable Ni-MH (1.2V x 2 )
Battery life: > 6 hours w/alkaline batteries
Size: 9.65" x approx.1.375" (245 x approx. 35mm)
Weight: 9.1oz (258g) w/alkaline batteries)
IRN-20
Technical Specs:
New Pendant type mic transmitter 2CH
w/ audio control
IRD-60
Technical Specs: The IRD-60 is an externally mounted infrared sensor that is
used with the IRR-15, IRR-30, IRR-30P receivers and the APS 25
speaker system that has the APS-IRII installed. The sensor is
fitted with an "F" connector and comes with a ceiling mounting
bracket.
IHR-3U
Technical Specs: Rechargeable NiMH "AA" battery for use in the IRN-10,
IRH-15c, IRH-56, IRB-56, IRB-10c, IRC-51, IRC-56,IRC-22, 320UPR and
325UPR. These are specially prepared to trigger the safety
interlock that stops these transmitters and receives from
attempting to recharge regular (non-rechargeable) batteries. Priced
each.
|