DPA Microphones has joined forces with Rycote� to develop the DPA 4017C-R
Shotgun/Rycote� Windshield Solution. The strong suspension and windshield
solution has been designed specifically to take the DPA 4017C shotgun mic�s
exceptional compact size and lightweight into consideration.
This kit provides everything a boomer, outside broadcaster, journalist or
location film maker could need for clear, directional sound, regardless of the
weather and environmental conditions.
Included in the box:
� DPA 4017B Shotgun pre-mounted in Rycote� Suspension with the Rycote�
Windshield
� DPA XLR cable
� DPA Windscreen for 4017C
� Rycote� fur windjammer
� Rycote� XLR holder
� Rycote� brush |
| Directional pattern: |
Supercardioid,
lobe-shaped |
| Principle of operation: |
Pressure gradient, with
interference tube |
| Cartridge Type: |
Pre-polarized
condenser |
| Frequency range: |
20 Hz to 20
kHz |
| Frequency range, ± 2
dB: |
40 Hz - 18 kHz with
typ. 3 dB soft boost at 15 kHz |
| Sensitivity, nominal, ± 2 dB at 1
kHz: |
19 mV/Pa; -34.4 dB
re. 1 V/Pa |
| Equivalent noise level,
A-weighted: |
Typ. 13 dB(A) re. 20
µPa (max. 15 dB(A)) |
| Equivalent noise level, ITU-R
BS.468-4: |
Typ. 24 dB (max. 26
dB) |
| S/N ratio (A-weighted), re. 1 kHz at 1
Pa (94 dB SPL): |
Typ. 81 dB(A) |
| Total Harmonic Distortion (THD) at 1
kHz: |
< 1 % up to 137 dB SPL peak |
| Dynamic range: |
Typ.
124 dB |
| Max. SPL, peak before
clipping: |
146 dB |
| Output impedance: |
100
ohm |
| Minimum load
impedance: |
2 kΩ |
| Cable drive
capability: |
100 m (328
ft) |
| Output balance principle: |
Impedance balancing
with Active Drive |
| Common Mode Rejection Ratio
(CMRR): |
> 50
dB |
| Power supply (for full
specifications): |
48 V Phantom power
(± 4 V) |
| Current consumption: |
2.8
mA |
| Color: |
Matte
black |
| Weight: |
70 g (2.5 oz) |
| Diameter: |
19 mm (0.75
in) |
| Capsule diameter: |
19 mm (0.75
in) |
| Output voltage, RMS: |
4.5
V |
| Microphone Length: |
154 mm (6.1
in) |
| Polarity: |
+V at Pin 2 for
positive sound pressure |
| Connector: |
XLR-3M. Pin 1: shield,
Pin 2: signal + phase, Pin 3: - phase |
|
Relative Humidity
(RH): |
Up to
90% |
| Temperature range: |
-40 °C to 45
°C (-40 °F to 113 °F) |
| Frequency response: |
Yes |
| Polar plot: |
Yes |
| Off-axis response: |
Yes |
|
|
|
