• Close-miking
• Superior for high sound levels
• Accuracy
• Colorless
Maximum clarity, minimum visibility
DPA’s Compact Cardioid range is proof that stunning clarity
and absolute neutrality are not solely the characteristics of
full-sized studio condenser mics alone. Designed to be hidden from
view, the diminutive design and high performance of the DPA 4011C
makes it the outstanding choice for unobtrusively miking all types
of television, film, theatre, concert and studio performances.
Limited in size, not application
Capable of handling high SPLs without distortion, the 4011C is
perfectly tailored for close-miking applications, minimizing bleed
from other instruments. When used to spot-mike larger orchestras,
these mics are hard to beat, and in film and TV studios, they are
excellent for off-camera voice recording or Foley work. For live
on-camera recordings, their matte black finish gives them a classic
yet inconspicuous appearance, while for sound reinforcement in
concert halls, theatres and houses of worship, they provide clean,
natural sound while reducing the noticeable effect of lighting
reflection.
Also available as matched stereo pair
The ST4011C stereo pair is supplied in a specially designed PeliTM
Case, the stereo matching is free of charge. |
| Directional
pattern: |
Cardioid |
| Principle of
operation: |
Pressure Gradient |
| Cartridge
Type: |
Pre-polarized condenser |
| Frequency
range: |
20 Hz to 20 kHz |
| Frequency range,
± 2 dB: |
40 Hz to 20 kHz |
| Sensitivity,
nominal, ± 2 dB at 1 kHz: |
10 mV/Pa; -40 dB re. 1
V/Pa |
| Equivalent noise
level, A-weighted: |
Typ. 18 dB(A) re. 20 µPa (max. 20
dB(A)) |
| Equivalent noise
level, ITU-R BS.468-4: |
Typ. 25 dB |
| S/N ratio
(A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 76
dB(A) |
| Total Harmonic
Distortion (THD) at 1 kHz: |
< 1 % up to 139 dB SPL
peak |
| Minimum load
impedance: |
2 kohm |
| Dynamic
range: |
Typ. 1121dB |
| Max. SPL, peak
before clipping: |
152 dB |
| Output
impedance: |
<200 ohm |
| Cable drive
capability: |
100 m (328 ft) |
| Output balance
principle: |
Impedance balancing with Active
Drive |
| Common Mode
Rejection Ratio (CMRR): |
> 50 dB |
| Power supply
(for full specifications): |
48 V Phantom power (± 4
V) |
| Current
consumption: |
2.8 mA |
| Color: |
Matte black |
| Weight: |
58 g (2 oz) |
| Microphone
Diameter: |
19 mm (0.75 in) |
| Capsule
diameter: |
19 mm (0.75 in) |
| Output voltage,
RMS: |
> 4 V |
| Microphone
Length: |
64 mm (2.5 in) |
| Polarity: |
+V at Pin 2 for positive sound
pressure |
| Connector: |
XLR-3M. Pin 1: shield, Pin 2: signal + phase,
Pin 3: - phase |
|
Relative Humidity (RH): |
Up to 90% |
| Temperature
range: |
-40 °C to 45 °C (-40 °F to 113
°F) |
|
Matching tolerance: |
± 1 dB |
| Phase deviation
for kit: |
< 10° |
|
|
|
