| DPA d:dicate™ 4003 Omni Microphone, 130
V |
|
Product Code:
4003
|
• detailed and natural
reproduction
• high sensitivity and low noise-floor
• excellent for concert halls and spot miking for acoustical
instruments
The 4003 is an omnidirectional high-voltage (130 V) condenser
microphone with extremely linear frequency response and extended
low frequency handling capability (-2 dB at 10 Hz).
The high sensitivity and the low noise-floor of the 4003 makes the
microphone the perfect choice for all professional recordings.
The 4003 is acoustically identical with the studio standard 4006,
but differs in the powering system.
The hi-voltage system enables the 4003 to handle app. 10 dB higher
SPL than the 4006. The impressive dynamic range of the 4003,
together with the wide range of acoustic pressure equalizers and
protection grids puts the 4003 in the top league of studio quality
microphones. |
|
Directional
characteristics:
|
Omnidirectional
|
| Principle of
operation: |
Pressure |
| Cartridge
type: |
16 mm (0.63 in) pre-polarized
condenser |
| Frequency range,
± 2 dB: |
10 Hz - 20 kHz |
| Sensitivity, nominal, ±2
dB: |
40 mV/Pa; -27 dB re. 1 V/Pa unloaded (at 250
Hz) |
| Equivalent noise level
A-weighted: |
Typ. 15 dB(A) re. 20 µPa (max. 17
dB(A)) |
| Equiv. noise level ITU-R
BS.468-4: |
Typ. 27 dB (max. 29 dB) |
| S/N ratio, re. 1 kHz at 1 Pa (94
dB SPL): |
79 dB |
| Total harmonic distortion
(THD): |
< 0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL
peak |
| Dynamic range: |
Typ. 120 dB |
| Output impedance: |
<75 ohm |
| Max. SPL, peak before
clipping: |
154 dB SPL peak (f<4 kHz) |
| Cable drive
capability: |
With HMA5000: Up to 300 m (984 ft) |
| Power supply: |
130 V via HMA5000 |
| Connector: |
4-pin modified XLR-M (High Voltage) |
| Weight: |
150 g (5.29 oz) |
| Current consumption: |
2.60 mA |
| Capsule diameter: |
16 mm (0.63 in) |
| Length: |
165 mm (6.5 in) |
| Operating temperature
range: |
-40 to +55°C (-40 to 131°F) |
|
|
|
|
|
