Audio Technica AT5040 Studio Vocal Microphone
Product Code: AT5040
Features
• Premier studio vocal microphone
• Debut of our flagship 50 Series
• Represents a milestone in condenser design
• Offering remarkably musical high-fidelity performance
• Profound realism and depth
• Presence and purity of sound
Audio-Technica’s premier studio vocal microphone, the AT5040 represents a milestone in condenser design, offering remarkably musical high-fidelity
performance, with profound realism and depth, presence and purity of sound.
Designed as a first-choice vocal microphone, the AT5040 cardioid condenser features an extremely
smooth top end with controlled sibilance. Large-diaphragm characteristics and fast transient response also make it ideal for recording acoustic instruments such as piano, guitar, strings and saxophone.
Another key AT5040 design feature is advanced internal shock mounting that effectively decouples the capsule from the microphone body. For additional isolation, each AT5040 is also
provided with Audio-Technica’s innovative new AT8480 shock mount.
Every AT5040 is hand assembled and individually inspected for 100% quality control. Each microphone is
enclosed in an elegant housing of aluminum and brass with high-quality gray finish for durability and low reflectivity.
Discrete components have been selected for optimized
capsule performance; in fact, every aspect of the microphone has been carefully considered to minimize any effects on the audio signal. |
Element |
Fixed-charge back plate, permanently polarized condenser |
Polar Pattern |
Cardioid |
Frequency Response |
20 - 20,000 Hz |
Open Circuit Sensitivity |
-25 dB (56.2 mV) re 1V at 1 Pa |
Impedance |
50 ohms |
Maximum Input Sound Level |
142 dB SPL, 1 kHz at 1% T.H.D.; |
Noise |
5 dB SPL |
Dynamic Range |
137 dB, 1 kHz at Max SPL |
Signal to Noise Ratio |
89 dB, 1 kHz at 1 Pa |
Phantom Power Requirements |
48V DC, 3.8 mA typical |
Weight |
582 g |
Dimensions |
165.3 mm (6.51'') long, 57.0 mm (2.24'') maximum body diameter |
Output Connector |
Integral l3-pin XLRM-type |
Accessories |
AT8480 shock mount for 5/8"-27 threaded stands; protective carrying case |
|
|