Audio Technica AT4041 Cardioid Condenser Microphone
Product Code: AT4041
Features
• Smooth, extended frequency response with a slight rise occurring in the high-frequency region
• Ideal for drum overheads, acoustic guitar, banjo, piano, horns and under snare
• Switchable hi-pass filter and rugged turned-brass microphone housing
• Custom shock mount provides superior isolation
• 80Hz low-cut filter, 12dB / octave
This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live
sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high
SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low
reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge
linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion. |
Element |
Condenser |
Polar Pattern |
Cardioid |
Frequency Response |
20 - 20,000 Hz |
Low Frequency Roll-Off |
80 Hz, 12 dB/octave |
Open Circuit Sensitivity |
-36 dB (15.8 mV) re 1V at 1 Pa |
Impedance |
100 ohms |
Maximum Input Sound Level |
145 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range |
121 dB, 1 kHz at Max SPL |
Signal to Noise Ratio |
70 dB, 1 kHz at 1 Pa |
Phantom Power Requirements |
48 V DC, 3.2 mA typical |
Weight |
120 g |
Dimensions |
6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter |
Output Connector |
Integral 3-pin XLRM-type |
Accessories |
AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case |
|
|