| AT4047MP, Multi-pattern Condenser Microphone |
Product Code: AT4047MP
|
Audio-Technica’s AT4047MP delivers vintage sound in a multi-pattern design with selectable omnidirectional, cardioid, and
figure-of-eight polar patterns. The microphone’s transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone
designs.
|
|
| AT4047MP Features |
• Three switchable polar patterns:
cardioid, omnidirectional, figure-of-eight
• Sonic characteristics reminiscent of early F.E.T. studio microphone designs
• 80 Hz high-pass filter switch and 10 dB pad
|
|
AT4047MP Specifications
| Element |
Externally-polarized (DC bias) condenser |
| Polar Pattern |
Cardioid, Omnidirectional, Figure-of-eight |
| Frequency Response |
20-18,000 Hz |
| Low Frequency Roll-off |
80 Hz, 12 dB/octave |
| Open Circuit Sensitivity |
–42 dB (7.9 mV), re 1V at 1 Pa |
| Impedance |
100 ohms |
| Maximum Input Sound Level |
155 dB SPL, 1 kHz at 1% T.H.D.; 165 dB SPL, with 10 dB pad (nominal) |
| Noise |
14 dB SPL |
| Dynamic Range (Typical) |
141 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio |
80 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
48V DC, 3.4 mA typical |
| Switch(es) |
Polar selection; Flat, roll-off; 10 dB pad (nominal) |
| Weight |
524 g (18.5 oz) |
| Dimensions |
188.0 mm (7.40") long, 53.4 mm (2.10") maximum body diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessory Included |
AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case |
|
|
|
|
