Offer PT-LX22 | Panasonic PT-LX22 | PT LX22

Panasonic PT-LX26 Projector PT-DW10000E,PTDW10000E

Product Code: PT-LX26	The PT-LX22 portable projector offer high brightness in a compact, 3.5-kg (7.7-lb) body. This model also features a wide range of functions that greatly reduce the hassle and cost of maintenance, such as a lamp replacement cycle of up-to-5,000 hours and an air filter replacement cycle of up-to-6,000 hours. A new intelligent lamp control system effectively reduces power consumption and this advanced model provides powerful visual support with superb performance while minimizing environmental impact.


Features Specification

• Full 2600 lm of Brightness and 500:1 Contrast
• Maximum 5000 hour lamp replacement cycle and 6000 hour air filter replacement cycle

• Quiet 29-db design does not interrupt meetings or classes

• Intelligent lamp control system reduces Power Consumption

• Displaying the total amount of reduced power consumption and CO₂ emission

• 10-Watt speakers and a microphone input enables audio playback directly from the projector.

		PT-LX22
Panel Size		14 mm (0.55 inches) diagonal (4:3 aspect ratio)
Display Method		Transparent LCD panel (x 3, R/G/B)
Pixels		786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
Lamp		230 W × 1, lamp replacement cycle (lamp power: High, Normal/Eco): 3,000 hours/4,000 hours
Brightness		2,200 lm (lamp power: High)
Contrast Ratio		500:1 (full on/full off, lamp power: High)
Resolution		1,024 × 768 pixels
Lens		1.2x manual zoom, manual focus, F 2.10-2.25, f 19.11-22.94 mm
Screen Size		0.76-7.62 m (30-300 inch)
Optical Axis Shift		6:1
Scanning Frequency -	RGB	fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
	YPBPR (YCBCR)	fH: 15.63 kHz, fV: 50 Hz [576i(625i)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
	S-Video/Video	fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Terminals	COMPUTER IN 1 / S-VIDEO IN	D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR /S-VIDEO x 1) (The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)
	VIDEO IN	RCA pin × 1 (Composite VIDEO)
	SERIAL IN	D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
Noise Level		37.0 dB (lamp power: High), 34.1 dB (lamp power: Normal), 29.0 dB (lamp power: Eco)
Installation		Ceiling/floor, front/rear
Power Supply		100-240 V AC, 50/60 Hz
Power Consumption		287 W (0.47 W in Eco standby mode, 7.1 W in Serial standby mode.)
Dimensions (W x H x D)		349 x 105 x 247 mm (13.7" x 4.1" x 9.7") (with legs at shortest position, not including protruding parts)
Weight		Approximately 2.90 kg (6.39 lbs)
Operating Temperature		5°C–35°C (41°F–95°F)
Operating Humidity		20%-80% (no condensation)
Supplied Accessories		Power cord x 1*5, wireless remote control unit, batteries (AAA/R03/LR03 type × 2), VGA cable x 1, filter cover, software CD-ROM (Logo Transfer Software)