|
Sound Devices
MM-1
Line Driver / HP
Monitor
The portable MM-1 combines two essential production functions
— microphone preamplification and headphone monitoring
— in one compact product. The MM-1 is a no-compromise,
studio-quality microphone preamplifier with phantom power,
high-pass filter, and built-in limiter. With its monitoring
function providing fold-back of preamp audio and external monitor
audio, the MM-1 is at home in the most complex broadcast remotes,
theatrical productions, and intercom setups.
| C931-TA-XL-2 |
|
|
| TA3-F to XLR-M 15"
Adapter Cable |
|
|
|
|
|
|
Key
Features
|
|
-
Maximum of 66 dB of
gain, in eleven discrete steps
-
Dynamic range
exceeding 120 dB
-
10 Hz to 50 kHz
audio bandwidth
-
High immunity to RF
interference
-
High current line
output driver
-
Transformer-balanced
input and output
-
Extended range peak
limiter via dual opto-isolators makes preamplifier virtually
"unclippable"
-
Selectable 48-volt /
12-volt phantom power or 12-volt “T" power
|
-
High-pass filter @
80 or 160 Hz, 6 dB per octave
-
Headphone monitoring
of microphone audio, monitor audio, or a mix of both
-
Monitor input
accepts mono, balanced or unbalanced line-level inputs on 1/4-inch
tip-ring-sleeve connector
-
Separate level
control of Monitor gain and overall headphone gain
-
Split ear function
via DIP switches
-
Internal battery
power (two-AA)
-
Excellent battery
life with alkaline and NiMH rechargeable batteries
-
External 5-17 VDC
powering (plug included)
-
High-strength
aluminum chassis with durable belt clip
|
|
|
Specifications
|
|
| Gain: |
(Mic - Line): 0 dB to 66 dB input to output, switch
selectable |
| Frequency
Response: |
(Mic - Line) 20 Hz –20 kHz,
+0.1, -0.5 dB, -1 dB at 50 kHz(relative to 1 kHz level with 150 ohm
source) |
| Equivalent Input Noise: |
(Mic) -126 dBu (-128 dBV) maximum (150 ohm source, flat
weighting, 22 Hz – 22 kHz bandwidth gain setting 36 dB or
greater) |
| Dynamic
Range: |
(Mic to Line) 122 dB minimum at the
+18 dB gain setting |
| THD +
Noise: |
0.05% maximum(from 50 Hz – 22 kHz @ +4 dBu output
level, 22 Hz – 22 kHz filter bandwidth, +46 dB gain
setting |
| Gain
Accuracy: |
(Mic - Line) +0.6, -0.1 dB with
reference to front panel gain markings (150 ohm source, 100 k load
impedances) |
| Output
Clipping Level: |
(Line) +22 dBu minimum with 100k ohm load+20 dBu minimum
with 600 ohm load |
| Input
Clipping Level: |
(Mic) +4 dBu minimum at the 0 or +18
dB gain setting |
| Common
Mode Rejection Ratio: |
100 dB minimum at 80 Hz60 dB minimum at 10
kHz |
| Weight: |
0.7 kg (1.1 lbs) |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
