|
Optional
Accessories
|
|
| |
| C931-TA-XL-2 |
|
|
| TA3-F to XLR-M 15"
Adapter Cable |
|
|
|
|
|
|
Key Features of
788T
|
|
-
Eight mic/line
inputs, each controlled with front panel, pop-out gain
controls
-
12-track recording,
to record iso's, stereo mix track, and two-track aux, Aux1,
Aux2
-
Each input has solo
headphone monitoring, 48 V phantom, limiter, polarity reverse,
high-pass, and selectable delay
-
Selectable sampling
rate converters on each digital input
-
Sampling rate
selectable up to 96 kHz
-
AES42 digital
microphone support
-
Backlit LCD display
viewable in any environment
-
8 x 13-segment
Peak/VU meters with arm LED
-
Word clock in and
out with tri-level video sync support
|
-
Time code generator
supports all data rates; holds time code for four hours with no
power sources attached
-
Internal 256 GB SSD
in the 788T-SSD
-
CompactFlash
slot with UDMA support
-
Powered by removable
Li-ion rechargeable batteries
-
External DC power
input operates unit and charges Li-ion battery
-
Back panel multi-pin
connector for one-cable connection to digital mixing board (AES
input/output, power, switch closure in/out)
-
FireWire 400/800 and
USB 2.0 connections for ultra-fast file tranfer between 788T's CF
and HDD to computer
-
USB keyboard input
for control
-
Aluminum &
stainless-steel chassis for exceptional durability and light
weight
-
Designed for the
same operational environmental extremes as Sound Devices field
mixers
|
|
|
Specifications of
788T
|
|
| Sampling Frequency: |
Internal: 32, 44.1, 47.952, 48, 48.048, 88.2, 96,
96.096
external clocking: 32–96.096 kHz via word clock or digital
inputs |
| Internal Data Path and Processing: |
32 bit, 192 dB dynamic
range |
| A/D, D/A Converters: |
24 bit, 96.096 kHz sample rate
maximum |
| A/D Dynamic Range: |
123 dB, A-weighted bandwidth
120 dB, 20 Hz–22 kHz bandwidth |
D/A Dynamic Range: |
114 dB, A-weighted bandwidth
111 dB, 20 Hz–22 kHz bandwidth
|
| Frequency Res. Mic or Line: |
10 Hz–20 kHz, +0.1, -0.5
(gain controls centered, measured at 48 kHz) |
| THD + Noise: |
Mic: 0.004% max (1 kHz, 22 Hz–22 kHz BW,
gain control down, -15 dBu input); line: 0.004% max (1 kHz, 22
Hz–22 kHz BW, gain control down, +16 dBu
input) |
Gain:
|
(input dBu to -20 dBFS)
Mic: Off (0) to 76.0 dB Line: Off, -26.0 to 50.0 dB |
| Input Impedance: |
Mic (XLR and TA3): 3.3k ohm; Line (XLR and TA3):
3.3k ohm |
| Input Clipping Level: |
Mic input: +8 dBu minimum (gain
= 10 dB); line input: +26 dBu minimum (gain = 0 dB) |
| Input Topology Mic and Line: |
Fully electronically balanced, RF, ESD, short, and
overload protected; pin-2 hot, pin-3 cold |
| Gain Matching Mic/Line inputs: |
0.1 dB increments,
channel-to-channel while linked |
| Common Mode Rejection Ratio: |
Mic: 40 dB minimum at 80 Hz |
Metering:
|
112-segment (8 x 14),
sunlight-viewable, selectable peak, VU, or peak (with or without
peak hold) with VU ballistics, variable brightness |
| High-Pass Filters: |
40-320 Hz in 10Hz steps @ 6/12 dB/oct (Setup Menu
selectable) |
| Mic Powering: |
((Each analog input selectable):
48 V phantom through 6.8k resistors, 10 mA per mic available,
menu-selected per channel in mic or line level positions
|
| Mic/Line Input Limiters: |
aVariable threshold -12 to -2 dBFS; Infinite:1
limiting ratio, 2 mS attack time, menu-selectable release time
200-2000 mS, soft-knee starting approximately 6dB below
setting.
|
| Analog Line Output Clipping Level: |
+24 dBu minimum, 10k ohm
load |
| Attenuation & Resolution: |
0–20 dB, 1 dB increments |
| Output Topology Line: |
Fully electronically-balanced,
RF, ESD, short, and overload protected; pin-2 driven hot, pin-3
driven cold; let pin-3 float for unbalanced connections.
|
| I/O – Digital: |
Balanced AES in 1-8 on DE15 connector 110 ohm, 2 V
p-p, AES and S/PDIF compatible with RCA adaptor, AES42 mode 1
compatible and provides 10 V to AES42 microphones
AES3 Balanced AES out 1-4 on TA3 connector; Balanced AES out 5-6 on
DE15 connector 110 ohm, 2 Vp-p, AES and S/PDIF compatible with RCA
adaptor;
|
| Digital Storage: |
Internal hard drive SATA
interface 2.5-in hard drive 4200–7200 RPM supported,
solid-state drive (SSD) support, FAT32 formatted, up to 2 TB
addressable
CompactFlash CF type I, II, and + (microdrive) compatible, UDMA
(300x) compatible, FAT32 formatted, up to 2 TB addressable
|
| File Types: |
Record: WAV (AES-31 format), mono or polyphonic,
at supported Fs, 24-bit or 16-bit;
Playback: WAV (AES-31 format), mono or polyphonic, at supported Fs,
24-bit or 16-bit;
MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo; MP2 @ 64,
96, 128, 160, 192, 256, or 320, 384 kb/s stereo
|
| Utilities: |
Drive formatting and speed test
for internal hard drive, CF and external drive
volumes |
| Data Transfer / Control: |
FireWire 400: For connection to external drives
and computers: IEEE-1394a compliant, 6-pin FireWire, Windows 2000,
XP, Vista, 7) Mac OS X only
FireWire 800: For connection to external drives and computers:
IEEE-1394b compliant, 8-pin FireWire, Windows (2000, XP, Vista, 7),
Mac OS X only
USB 2.0: Slave mode only. For connection to Windows( 2000, XP,
Vista,7) Mac OS X only
USB Keyboard Input: For connection to USB keyboards for entering
notes and controlling features and functions of the 788T via user
selectable keyboard shortcuts
|
| Time Code: |
Modes Supported: Off, free run,
record run, 24 hour run, external time code receive
Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND, 30+
Accuracy: 0.2 ppm, when tuned with Ambient Master Controller, holds
TC clock for 4 hours after main battery removal; after 4 hours,
retains time of day
Input / Output 20k ohm impedance, 0.3V p-p (–8 dBu) minimum /
1k ohm impedance, 3.0V p-p (+12 dBu)
|
| Word Source |
Internal Sync: internal word clock generator
External Sync Input: Word Clock, AES3, or Video (NTSC, PAL, and
Tri-Level)
Word Clock Output: Square wave, running at sample rate, 3.3 V p-p,
75 ohm
|
|
Power: |
Power supply (batteries):
operating cell, removable 7.2 V (nominal) Sony L-type Li-ion,
operational from 6.5–8.5 V, time code battery, internal 3.6
Li–ion
Power supply (external): 10–18 V, 1000 mA minimum, via
locking 4-pin Hirose connector, use Hirose #HR10-7P-4P (DigiKey#
HR100-ND) for locking mating DC connector; pin-1 (-), pin-4
(+).
|
| Environmental: |
Operation and Storage ambient temperature
5–55° C, relative humidity (non-condensing)
80% |
|
Other: |
Tone Oscillator: 100 Hz–10
kHz, variable output, assigned to tracks or outputs
(menu-selectable) |
| Dimensions and Weight: |
Size: 45 mm x 257 mm x 163 mm (H x W x D) 1.8" x
10.1" x 6.4"
Mass: unpackaged: 1.7 kg, (3 lbs 12 oz.) without
battery |
|
