Hollyland Syscom 1000T Full-duplex Wireless Intercom System

Hollyland Syscom 1000T Full-duplex Wireless Intercom System with Tally

Product Code: SYSCOM 1000T

Syscom 1000T*4 Hollyland Syscom 1000T-4B 
Syscom 1000T*8  Hollyland Syscom 1000T-8B 

review button

• 1000ft full-duplex wireless communication
• Support dynamic and condenser microphone
• Support wireless tally and remote mute
• 1 base station supports upto 8 rechargeable beltpacks
• LCD Screen, Easy to operate
• 4 external high gain antennas
• DC/AC Dual power supply system
• USB upgrade

SYSCOM 1000T is a 1000ft full-duplex wireless talkback system supplied in both four and eight beltpacks kit options. The base station has a DB25 tally interface, it supports 3-pin XLR gooseneck mic, loudspeaker call, it can also connect with LEMO headsets and 4-segment 3.5mm earphones.

As with the SYSCOM 1000T, the whole system provides a sidetone feature. Each belt pack provides 10 hours of battery life and can also be charged by a portable power bank. All beltpacks are equipped with a built-in tally feature that can be turned on in the beltpack setting. The two packing options are supplied with either five or nine LEMO headsets. Here are a few other key features of the system,

The entire team can hear and speak at the same time to achieve synchronized hands-free communication without additional button operations. The microphone of the headset comes with its own switch too so it can be easily turned off by pushing the microphone rod over the head.

The system works straight out of the box. The base station and beltpack can be used right after they are turned on. No further settings are required. Both the base station and beltpacks comes with LEMO and 3.5mm audio jack for the compatibility with professional LEMO headsets and ordinary 3.5mm earphones.

The base station is equipped with an LCD screen and each beltpack with an OLED screen for information display, including the real-time status of the beltpack, battery power and signal strength, etc.

The communication coverage radius of SYSCOM 1000T is 1000ft. Optional antenna accessories can be selected to expand the coverage. The system comes with both four and eight beltpacks kit options. If eight channels are still not enough, two sets of systems can be daisy-chained to achieve 16-channel full-duplex wireless communication to expand the coverage.

For other applications, it is possible to interconnect SYSCOM 1000T with another wired intercom system, such as ClearCom, RTS, Datavideo, and other wired communication systems.

SYSCOM 1000T uses the 1.9GHz digital communication solution. It is different from the standard solutions used on other wireless devices, such as wireless microphones (600MHz-900MHz), wireless video transmissions (5.8GHz), and walkie-talkie (433MHz). All different frequency bands do not interfere with each other, which makes the system clear of interference even with all types of wireless devices used on site.

FREQ Response: 300Hz~4KHz
S/N Ratio > 60dB
Distortion Degree < 2%


• Television Studios
• Concerts
• Product Launch Events
• Live Broadcasting
• Filmmaking
• Church Services

Hollyland Intercom Systems:

Hollyland MARS T1000

Hollyland Solidcom C1-8S with hub

Hollyland Solidcom C1

Hollyland Solidcom M1

Hollyland Solidcom C1 Pro

Base station Beltpack
Power Supply Way 7-36V DC Input; NP-F970 Battery 1600mAh Polymer Lithium Battery
Frequency Response 300Hz - 5KHz
Signal to noise ratio > 50dB
Distortion < 2%
Working range Under LOS, 1000ft working range from base station to beltpack
Frequency Band 1.9GHz
Modulation Mode GFSK
Transmission Power Maximum 24dBm
Receiver Sensitivity < -93dBm
Bandwidth 1.728MHz
Power Consumption < 6W < 0.7W
Certification FCC; CE

• Base Station x1
• Beltpack ( 4 or 8)
• Single-sided Headset
• Type-C Cable
• 1.9G High-gain Antenna
• AC Power Cable
• Gooseneck Microphone
• User manual
• Beltpack Charger