Hollyland Solidcom M1 Wireless Intercom

Hollyland SOLIDCOM M1 Full-duplex Wireless Intercom Solution

Hollyland SOLIDCOM M1-hands-free systems are designed to be easy to use, lightweight and portable, with the ability to be quickly deployed on location, complete with DC backup, in a matter of minutes.

Solidcom M1 is your go-to choice for micro-mid events with a capacity from 100 to 1000 guests, including church events, electronic field productions, exhibitions, concerts, etc.

INDUSTRY-FIRST SOLUTION TO POWER UP TO 1300FT-RADIUS COMMUNICATION RANGE

For the first time in the industry, an integrated panel antenna is inserted into the base station. Besides, Hollyland SOLIDCOM M1 is also equipped with a pair of external FRP antennas. Combining these 2 antenna options, Solidcom M1 significantly improves on-site work efficiency and flexibility, and prolongs transmission range to a great extent.

ENHANCED AUDIO QUALITY LET YOUR VOICE BE HEARD CRISP AND LOUD

With an all-round upgrade, Hollyland SOLIDCOM M1 guarantees smooth and clear group communication no matter how loud and complicated the background noise is.

INTUITIVE GROUPING AT A SINGLE TAP

Setting up groups with Solidcom M1 is an intuitive experience. It’s as easy as selecting the numbers of specific beltpacks and making them a group. Either through the base station, Hollyland APP or webpage, a group can be created and managed in seconds.

MULTI-DEVICE CASCADE CONNECTION FOR HASSLE-FREE GROUP COMMUNICATION

Fitted with 4 different interfaces (2W (XLR connector), 4W (RJ45), POE/LAN power supply, and cascading interfaces), the base station can be cascaded to multiple sets of different audio equipment only by connecting with a standard network cable or an XLR cable.

Each set of Hollyland Solidcom M1 is equipped with 8 beltpacks. Simultaneous group calls for 16 people in 3 groups are made possible with 2 cascaded sets, with a standard network cable of 328ft (100m) for cascading, sufficient for staff dispatching of most events.

OUT-OF-THE-BOX CONVENIENCE

The beltpacks are paired by factory default and are good to use out of the box. In the event of cross-area collaboration where changing or adding beltpacks is needed, users only need to connect the beltpacks to the base station via USB to Type-C cables to pair and group the beltpacks.

A PLETHORA OF CHOICES FOR YOUR EARS

Hollyland Solidcom M1 comes standard with professional LEMO headphones whose microphones can be switched on by putting down the microphone boom or vice versa. The headphone is also featured with the Sidetone function which allows the user to hear his own voice even with the headphone on and then adjusting speaking volume in time.

SAY NO TO LOW-BATTERY ANXIETY

Each beltpack is equipped with 2 removable Li-ion batteries which can be charged independently and are fully charged in only 2.5 hours. With a 6-hour runtime for each battery, the beltpack will never be out of power when using the two batteries in turn.

Hollyland Intercom Systems:

Hollyland MARS T1000

Hollyland Solidcom C1-8S with hub

Hollyland Solidcom C1

Hollyland Solidcom C1 PRO

Hollyland Syscom 1000T

Blogs:

Differences between 1.9GHz, 2.4GHz and 5GHz Signals

	STATION	BELTPACK
Interfaces	1 x Power Supply Interface (RJ45) 1 x POE Interface (RJ45) 1 x 4 Wire Audio Interface (RJ45) 1 x USB Interface 1 x 2 Wire Audio Interface (XLR)	1 x 3.5mm Headset Interface 1 x LEMO Headset Interface 1 x USB-Type-C Interface
Power Supply	NP-F Battery POE Power Adapter	1500mAh Lithium Polymer Battery
Frequency Response	200Hz to 7KHz	200Hz to 7KHz
Signal-to-Noise Ratio	>50dB	>50dB
Distortion	<1%	<1%
Use Range	450 Meters Line-of Sight Usage	450 Meters Line-of Sight Usage
Frequency Band	1.9 GHz	1.9 GHz
Modulation Mode	GFSK	GFSK
Transmit Power	Maximum 21dBm	Maximum 21dBm
Receiving Sensitivity	≤ -93 dBm	≤ -93 dBm
Frequency Bandwidth	≤ -93 dBm	≤ -93 dBm
Power Consumption	< 3 W	< 0.6 W
Dimension	(L*W*H): 255.5*180.4*48.5mm	(L*W*H): 105*65*22.4mm
Weight	About 1560g	About 200g

SOLIDCOM M1 8-Beltpack Package:
• Station x 1Beltpack x 8
• Charging Base x 1
• High Gain Omnidirectional Antenna x 2
• LEMO Single-Ear Headset x 8
• RJ45 to XLR Cable (5 meters) x 1
• USB-Type-A to Type-C Cable x 1
• POE Adapter x 1
• 4-Pin XLR Adapter x 1
• Beltpack Battery x 16
• 3/8 Installation Accessory x 1
• User Guide x 1

SOLIDCOM M1 4-Beltpack Package:
• Station x 1
• Beltpack x 4
• Charging Base x 1
• High Gain Omnidirectional Antenna x 2
• LEMO Single-Ear Headset x 4
• RJ45 to XLR Cable (5 meters) x 1
• USB-Type-A to Type-C Cable x 1
• POE Adapter x 1
• 4-Pin XLR Adapter x 1
• Beltpack Battery x 8
• 3/8 Installation Accessory x 1
• User Guide x 1