DXA-8

BeachTek Camcorder XLR Adapters

>Home > Main > Camcorder XLR Adapters > DXA-8

PRODUCTS

HDSLR Adapters

DXA-SLR ULTRA

DXA-SLR PURE

DXA-CONNECT

DXA-BMD

DXA-SLR PRO
DXA-SLR MINI
DXA-5Da
Camcorder XLR Adapters
MCC-2
DXA-2T
DXA-HDV
Accessories
KAMKIT
MultiMount-5D
RB2T
Cables
Battery

BeachTek  DXA-8 - Ultimate Adapter (Discontinued)
     


Model: DXA-8
 

  


Front Control Panel


Rear Connection Panel

  

DXA-8 - Ultimate Adapter
 The ultimate XLR Adapter for DV camcorders. Two channels with preamps, limiters and phantom power
The DXA-8 Ultimate Adapter is a superb front end for DV camcorders. Low noise preamps provide clean, powerful audio levels from virtually any microphone and the output level is preset to the sweet spot for the best signal-to-noise ratio. The no fuss limiters eliminate distortion caused by overly hot inputs for great sound every time. Easy to set up - only requires the adjustment of one gain control for each channel. Limit indicating LED's ensure proper gain setting. Dual 48 volt phantom power for professional microphones. One sweet package!
 		  
Features  
  • Dual no fuss limiters with LED indicators
  • Dual Infinitely adjustable gain
  • Dual switchable 48 volt phantom power
  • Dual XLR balanced inputs
  • One unbalanced mini-jack input
  • Transformer isolated inputs and outputs
  • Uses one 9 volt battery
  • LED battery power indicator
  • Sturdy extruded aluminum chassis
  • Easily mounts to camera and tripod
  • Extremely easy to set up and use
  • Superb Sound
  
Specifications  
Gain: Adjustable from -10 dB to +15 dB  
Frequency response: 20 Hz to 20 KHz, +/-3 dB (limiter on)  
Output noise level: less than -80 dBu  
Input level before clipping: +1.5 dBu (min gain with limiter on)
-27 dBu (max gain with limiter on)		  
Maximum output level : -30 dBu (limiter off)
-36 dBu (limiter on)		  
Phantom Power: Dual regulated 48 volt power supplies
Current to 14 mA (direct short)		  
Battery type / duration: One standard 9 volt alkaline battery
10 hours typical (no phantom)
LED battery indicator		  
Current draw: 35 mA typical (no phantom)  
Case: Powder coated aluminum  
Dimensions: 5.25" L x 3.5" W x 1.25" H  
Weight: 16 oz.  
   
 
 

 

 

Read our blogs