|
|
|
BeachTek DXA-10 -
Stereo Microphone Preamplifier (Discontinued)
|
| |
|
|
|
Model:
DXA-10
|
|
|
|
Front Control
Panel
|
Back Control
Panel
|
|
Stereo
Microphone Preamplifier , XLR Microphone to RCA Line Level
Amplifier
Professional, two channel microphone amplifier with built-in
phantom power
Studio quality audio with superior headroom
Ideal for the Sony HDR-FX1 camcorder
The DXA-10 is a
professional two channel, battery-powered microphone preamplifier
with built-in phantom power. Easily connect balanced XLR
microphones to consumer audio recording gear. Ideal for use as a
very quiet front end for camcorders such as the Canon XL1s and Sony
FX1, and also MiniDisc recorders or any other device that lets you
use line levels inputs directly. The line level inputs bypass the
normally poor quality preamps in the recorder for far superior
audio quality. Has both LINE and MIC level outputs for versatility.
Studio quality audio and professional +/- 15 volt rails for lots of
headroom. The slideout drawer makes battery replacement a snap.
Rugged construction ensures years of use and the removable belt
clip makes it perfect for portable applications where no compromise
sound is required.
|
|
| Features |
|
- Two balanced XLR
microphone inputs
- Two line level RCA
outputs
- Mic level stereo mini-jack
output
- Dual low noise preamps
with +/- 15 volt rails for plenty of
headroom
- High / Low gain settings
for dynamic and condenser type microphones
|
- 20 Hz to 20 kHz audio
bandwidth
- Dual switchable 48 volt
phantom power for condenser microphones
- Easily replaceable 9 volt
battery
- LED battery
indicator
- Removable belt clip for
easy portability
- Sturdy extruded aluminum
chassis
- Superb
sound
|
|
| Specifications |
|
| Gain: |
Switchable: HI (60 dB); LO (30 dB) |
|
|
Frequency Response: |
20 Hz to 20 KHz, -1
dB |
|
| THD + N: |
less than 0.03 @ 1 kHZ |
|
|
Signal-To-Noise
Ration: |
90db @ -10 dBV
output |
|
| Maximum output level: |
+18 dBu (RCA output)
-37 dBu (MIC output) |
|
|
Phantom Power: |
Dual regulated 48 volt power
supplies
Current to 14 mA (direct short) |
|
| Battery type / duration: |
One standard 9 volt alkaline battery
4 hours typical (no phantom) |
|
|
Current draw: |
120 mA (no
phantom)
|
|
| Case: |
Powder coated aluminum |
|
|
Dimensions: |
5.25" L x 3.5" W x 1.25"
H |
|
| Weight: |
14 oz. |
|
| |
|
 |
|
|
