DPA d:dicate� ST4011C Stereo Pair with 4011C Compact Cardioids
|
|
Product Code: ST4011C
 |
� Excellent for both PA/Live and recording
� Carefully matched within � 1 dB
� Low profile mounting options
� PeliTM Case transportation and protection
Whenever a small, lightweight, inconspicuous microphone for top-quality sound is
required, the compact design and uniform unidirectional response of our
versatile 4011C makes it the perfect choice. They are particularly popular as
spot mics for classical recording and on-stage close mics for live sound.
The DPA ST4011C is a complete DPA 4011C Stereo Pair with two carefully
factory-matched first order cardioid microphones. Even though the standard
tolerances on DPA Reference Standards are extremely low, a stereo match is even
closer.
The specially selected DPA 4011C microphones are matched within �1 dB on both
frequency response and sensitivity.
The foam design in the heavy-duty transportation box allows for fast and easy
exchange of microphone/accessory inlays.
Included in this kit
Two carefully matched 4011C cardioid microphones, sturdy PeliTM case, holders,
and windscreens. |
|
Directional
characteristics: |
Cardioid |
|
Principle of
operation: |
Pressure gradient |
|
Cartridge type: |
Pre-polarized condenser |
|
Frequency range: |
20 Hz - 20 kHz |
|
Frequency
range,
± 2 dB at 30cm: |
40 Hz - 20 kHz |
|
Sensitivity, nominal+/- 2 dB at 1KHz: |
10 mV/Pa; -40 dB re.
1 V/Pa |
|
Equivalent
noise level A-weighted: |
Typ. 18 dB(A) re. 20
�Pa (max. 20 dB(A)) |
|
Equiv. noise level ITU-R
BS.468-4: |
Typ. 25 dB |
|
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 76 dB(A) |
|
Total harmonic distortion
(THD): |
<1% up tp
139 dB SPL peak |
|
Minimum load impedance: |
2 kohm |
|
Dynamic
range: |
Typ. 121 dB |
|
Max. SPL, peak before
clipping: |
152 dB |
|
Output
impedance: |
<200 ohm |
|
Output balance principle: |
Impedance balancing
with Active Drive |
|
Cable drive
capability: |
100 m (328 ft) |
|
Common Mode Rejection Ratio (CMRR): |
> 50 dB |
|
Power
supply: |
48 V Phantom power (� 4 V) |
|
Current consumption: |
2.8 mA |
|
Connector: |
XLR-3M. Pin 1:
shield, Pin 2: signal + phase, Pin 3: - phase |
|
Color: |
Matte black |
|
Weight: |
58 g (2 oz) |
|
Diameter: |
19 mm (0.75 in) |
|
Capsule diameter: |
19 mm (0.75 in) |
|
Length: |
64 mm (2.5 in) |
|
Output voltage, RMS: |
> 4 V |
|
Polarity: |
+V at Pin 2 for
positive sound pressure |
|
Operating temperature
range: |
-40 �C to 45 �C (-40
�F to 113 �F) |
|
Relative Humidity (RH): |
Up to 90 % |
|
Phase deviation for kit: |
< 10� |
|
Matching tolerance: |
� 1 dB |
|
|
|
|
|
