� The ultimate
choice for the demanding engineer and audio purist
� A complete state-of-the-art A-B Stereo Kit
� Designed for a broad range of uses
The 3532-SP is a complete state-of-the-art A-B Stereo Kit with two 4041-SP
microphones, carefully matched within 1dB on both frequency response,
sensitivity and self-noise. It is the ultimate choice for the demanding engineer
and audio purist who emphasises clarity, openness, precision, low self-noise and
high sensitivity.
The kit is designed for a broad range of uses, e.g. as main pair for classical,
jazz and folk genres, grand pianos, guitars, overheads or close-miking drums,
choirs, strings, wind instruments and much more. You get a bright and
transparent sound quality with lots of headroom. With its on-axis soft boost,
the 4041-SP omni microphone can be angled to use as a natural equalizer. |
|
Directional
characteristics: |
Omnidirectional |
|
Principle of
operation: |
Pressure |
|
Cartridge type: |
24 mm (1 in) condenser w. stainless steel
diaphragm |
|
Frequency
range,
�
2 dB: |
20 Hz - 20 kHz with 4 - 6 dB
soft boost at 8 kHz |
|
Equivalent noise level
A-weighted: |
Max. 8 dB(A) re. 20 µPa |
|
Equiv. noise
level ITU-R BS.468-4: |
Max 20 dB |
|
S/N ratio (A-weighted), re. 1
kHz at 1 Pa (94 dB SPL): |
86 dB |
|
Total harmonic distortion
(THD): |
<0.5% up to 120 dB SPL peak,
<1% up to 126 dB SPL peak |
|
Dynamic range: |
118 dB |
|
Max. SPL,
peak before clipping: |
134 dB |
|
Output impedance: |
<200 Ohm |
|
Cable drive
capability: |
Up to 100 m (328
ft) |
|
Power supply: |
48 V Phantom power |
|
Connector: |
3-pin XLR-M (Standard
P48) |
|
Weight: |
190 g (6.7 oz) |
|
Phase
deviation for kit: |
2.20 mA |
|
Length: |
170 mm (6.7 in) |
|
Capsule
diameter: |
24 mm (1 in) |
|
Microphone length: |
170 mm (6.69 in) |
|
Matching tolerance
(frequency response and sensitivity): |
±5 dB (20 Hz - 20
kHz) |
|
|
|
