| DPA SC4098 Podium Microphone |
|
|
|
SC4098-BX15 |
|
Miniature Supercardioid Microphone,
Black, XLR, 15 cm Boom |
 |
|
|
SC4098-BX30 |
|
Miniature Supercardioid Microphone,
Black, XLR, 30 cm Boom |
|
|
|
SC4098-BX45 |
|
Miniature Supercardioid Microphone,
Black, XLR, 45 cm Boom |
|
|
• Outstanding audio
quality
• Wireless podium mic capability
• Highly directional – very isolated
• High rejection of radio frequency interference
• Sleek design
Exceptional audio quality
Clean, intelligible sound is key when a single speaker is
addressing a crowd. Our d:screet Podium Microphones deliver high
intelligibility with DPA controlled directionality and rejection of
background noise.
Our superb DPA quality and remarkably clean sound is available at a
modest price level in podium microphones based on our d:screet
miniature series. These microphones include the thoroughly tested
d:screet Miniature capsule and interference tube technology.
Wireless podium mic capability with our MicroDot
versions
Our d:screet Podium Microphones are available with our MicroDot
connector making them well suitable for a wireless Podium Mic
setup. No more cables across the stage, simply connect the Podium
Mic with a wireless transmitter and your podium setup is more
flexible than ever.
Different lengths for different tasks
All d:screet Podium Microphones provide linear, natural sound
combined with elegant visual design. Boom pole lengths and
gooseneck choices can be tailored for specific requests. Standard
types are 30 cm and 45 cm with top and bottom goosenecks which are
available in black. The short 15 cm variant is ideal for table or
hanging applications and comes in booth black and white.
Speech intelligibility is extraordinary high and clarity of voice
is definitely in its own league. Visual elegance is held through
the thinnest pole available and a sleek Scandinavian design. The
MicroDot d:screet boom poles can even run wireless through the DPA
adapter range. |
| Directional
characteristics: |
Supercardioid |
| Principle of
operation: |
Pressure gradient |
| Cartridge type: |
Pre-polarized condenser |
| Frequency range |
20 Hz – 20
kHz |
| Frequency range, ± 2 dB, 20
cm (7.9 in) distance: : |
100 Hz – 15 kHz with 3 dB diffuse field boost at 8-15
kHz. Permanent 2nd order low-cut filter (-3 dB at 80
Hz) |
| Sensitivity, nominal, ±3
dB: |
16
mV/Pa at 1 kHz; -36 dB re. 1 V/Pa |
| Equivalent noise level
A-weighted: |
Typ. 23 dB(A) re. 20 µPa (max. 26 dB) |
| Equiv. noise level ITU-R
BS.468-4: |
Typ. 35 dB (max. 38 dB) |
| S/N ratio, re. 1 kHz at 1 Pa (94
dB SPL): |
71
dB(A) |
| Total harmonic distortion
(THD): |
< 1 % up to 123 dB SPL peak, < 1 % up to 120 dB SPL RMS
sine |
| Dynamic
range: |
Typ. 102 dB |
| Max. SPL, peak before
clipping: |
136 dB |
| Output impedance: |
100 ohm. |
| Minimum load
impedance: |
2
kΩ |
| Cable drive
capability: |
Up
to 300 m (984 ft) |
| Output balance
principle: |
Impedance balancing with Active Drive |
| Common Mode Rejection Ratio
(CMRR): |
> 50 dB |
| Power supply: |
48
V phantom power ± 4 V |
| Current consumption: |
3.5 mA |
| Connector: |
XLR-M |
| Weight: |
SC4098-BX15: 75 grams (2,6 oz), SC4098-BX30: 80 grams (2,8 oz),
SC4098-BX45: 88 grams (3,1 oz) |
| Microphone length: |
SC4098-BX15: 15 cm (6 in), SC4098-BX30: 30 cm (12 in),
SC4098-BX45: 45 cm (18 in) |
| Microphone height: |
Height: 12 mm (0.5 in) |
| Polarity: |
+V
at pin 2 for positive sound pressure |
| Operating temperature
range: |
-40 °C to 45 °C (-40 °F to 113
°F) |
|
|
|
|
|
