| DPA d:screet™Necklace
Microphone |
|
ProductCode:
NECKLACEMIC
|
For when convenient mounting
and consistent output are the primary requirements, DPA have
created the d:screet™ Necklace Microphone. The mic features
DPA legendary d:screet 4061 omnidirectional miniature capsule in a
soft rubber necklace offering fast, repeatable and "do-it-yourself"
mounting. Designed for mounting by non-technicians, the necklace is
the perfect choice in for instance a reality show setting.
The d:screet Necklace Microphone comes in black, white, and brown
and in a lengths of either 47 cm or 53 cm (18.3 in or 20.9
in). |
• Plug and
play mounting
• Consistent output
• Minimal visual impact
• Adapts to all pro wireless systems
Industry leading sound quality
With very low noise and an extremely high sensitivity, the
d:screet™ Miniature Mics offer the most clear, transparent,
and natural sound available on the miniature mic market. The mics
are capable of handling up to 154 dB peak before clipping, and with
a linear response and low distortion and an extremely large dynamic
range, they sound great no matter the application.
Flexibility and wireless adaptability
With eminent sound quality and adapters available for all pro
wireless systems, the d:screet Necklace Mic is the obvious choice
for any application requiring a big sound and a small footprint and
with our line of adapters the d:screet Necklace Mic is compatible
with all pro level wireless systems.
|
| Directional
characteristics: |
Omnidirectional
|
| Principle of
operation: |
Pressure |
|
Cartridge type: |
Pre-polarized condenser element with vertical
diaphragm |
| Frequency range,
± 2 dB: |
High boost grid: 20 Hz – 20 kHz, 10 dB
boost at 12 kHz. |
| Sensitivity,
nominal, ±3 dB at 1 kHz: |
6 mV/Pa; -44 dB re. 1 V/Pa |
| Equivalent noise
level A-weighted: |
Typ. 26 dB(A) re. 20 µPa (max. 28
dB(A)) |
| Equiv. noise level
ITU-R BS.468-4: |
Typ. 38dB (max. 40 dB) |
| S/N ratio, re. 1
kHz at 1 Pa (94 dB SPL): |
Typ. 68 dB(A) |
| Total harmonic
distortion (THD): |
<1% THD up to 123 dB SPL peak; < 1 % THD
up to 120 dB SPL RMS sine |
| Dynamic
range: |
Typ. 97 dB |
| Max. SPL, peak
before clipping: |
144 dB |
| Output
impedance: |
30-40 Ohm |
| Cable drive
capability: |
Up to 300 m (984 ft) |
| Polarity: |
Positively increasing sound pressure produces
positive going voltage on MicroDot pin |
| Power
supply: |
For wireless For wireless systems: Min. 5 V
– max. 50 V through DPA adapter. With
DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full
performance. |
| Color: |
Black, beige or white |
| Connector: |
MicroDot |
| Weight: |
13 g (0.46 oz) incl. cabel and MicroDot
connector |
| Microphone
diameter: |
5.4 mm (0.21 in) |
|
Necklace
length: |
47 or 53 cm (18.5 or 20.7 in) |
| Microphone
length: |
12.7 mm (0.5 in) |
| Cable
length: |
1.1 m (3.6 ft) |
| Cable
diameter: |
1.6 mm (0.06 in) |
|
Operating temperature
range: |
-40 °C to 45 °C (-40 °F to 113
°F) |
| Relative Humidity
(RH): |
Up to 90% |
|
| |
|
|
|
|
