| DPA LMK-SC4060 Lavalier Microphone Kit with
4060 |
|
|
|
LMK4060-W |
|
Lavalier Microphone Kit,
White |
 |
|
|
LMK4060-B |
|
Lavalier Microphone Kit,
Black |
|
|
The LMK-SC4060 Lavalier Microphone
Kit is perfect for broadcasters, TV studios, news anchors and other
public speakers.
Offering great detail and
resolution, the d:screet SC4060 Omni Mic is very natural sounding.
The SC4060 has a very low noise floor, impressive sensitivity and
can handle high SPLs.
Minimum visibility
A robust and unobtrusive solution, the tiny d:screet™ SC4060
Omnidirectional Miniature Microphone is placed in the smallest
holder on the market where it is protected from rough handling.
More about the minature mic holder from DPA.
The kit is available in black and white.
Microphone placement
The miniature condenser mic is omnidirectional and picks up the
sound perfectly, no matter which direction the microphone is placed
in.
The holder is designed to minimize clothing noise, and is prepared
for both left and right mounting on lapels, shirts, and
neckties.
Two different protection grids are included in the kit. By changing
these grids you can acoustically modify the microphone's response
according to placement. |
• SC4060
omnidirectional microphone with 3 meter cable
• DAD6001-BC adapter, MicroDot to 3-pin XLR (P48) with belt
clip
• DMM0017 Miniature mic holder
• DUA6001 Grid, soft boost
• DUA6002 Grid, high boost
The LMK-SC4061 kit is still available with the original
d:screet™ 4061 Omnidirectional Miniature Microphones without
the reinforced cable relief upon request. |
| Directional
characteristics: |
Omnidirectional |
| Principle of
operation: |
Pressure |
| Cartridge type: |
Pre-polarized condenser element with vertical
diaphragm |
| Frequency range,
± 2 dB: |
Soft boost grid: 20 Hz - 20 kHz ±2 dB, 3 dB soft boost
at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB
boost at 12 kHz |
| Sensitivity, nominal, ±3
dB: |
20 mV/Pa; -34 dB re. 1
V/Pa |
| Equivalent noise level
A-weighted: |
Typ. 23 dB(A) re. 20
µPa (max. 26 dB(A)) |
| Equiv. noise level ITU-R
BS.468-4: |
Typ. 35 dB (max. 38
dB) |
| S/N ratio, re. 1 kHz at 1 Pa (94
dB SPL): |
71
dB(A) |
| Total harmonic
distortion (THD): |
<1% THD up to 123 dB
SPL peak; < 1 % THD up to 120 dB SPL RMS sine |
| Dynamic range: |
Typ. 100 dB |
| Max. SPL, peak before
clipping: |
134 dB |
| Output impedance: |
30-40
Ohm |
| Cable drive
capability: |
Up to 300 m (984 ft) |
| Power
supply: |
For wireless systems:
Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V
phantom power ±4 V. |
| Connector: |
MicroDot |
|
Microphone Weight: |
<7.5 g (0.26 oz)
incl. cable and MicroDot connector |
| Microphone diameter: |
5.4 mm (0.21 in) |
|
Microphone length: |
12.7 mm (0.5
in) |
|
Cable length: |
1.8 m (6
ft) |
| Polarity: |
Positively increasing sound pressure produces positive
going voltage on MicroDot pin |
|
| |
|
|
|
|
