| |
4041-T2 Large
Diaphragm Microphone, Tube, 130 V
|
| |
Product
Code:4041T2
|
Model:4041T2
Other Microphones -
Omnidirectional
The DPA 4041-T2 is an
omnidirectional microphone that uses the 24 mm (1 in) Modular
Microphone Cartridge MMC4041 with the MMP4000-T2 Tube Preamplifier
which offers a slight musical coloration of the
recording.
|
|
| |
|
|
| |
|
| |
|
4041-T2 Large Diaphragm
Microphone, Tube, 130 V
The DPA 4041-T2 is an
omnidirectional microphone that uses the 24 mm (1 in) Modular
Microphone Cartridge MMC4041 with the MMP4000-T2 Tube Preamplifier
which offers a slight musical coloration of the recording.
The cartridge MMC4041 can be unscrewed from the preamplifier which
allows for the exchange of the preamplifier module.
The frequency response from 10 Hz to 20 kHz with a 4-6 dB soft
boost around 8 kHz matches the response of the highly acclaimed DPA
4040 Hybrid Microphone.
The 4041-T2 is powered via the standard HMA5000 Microphone
Amplifier (not included with the 4041-T2), a microphone system that
offers a totally transformerless audio path with an exceptionally
low noise floor of maximum 10 dB(A) and a SPL handling capability
of 144 dB SPL peak.
|
|
General
Specifications |
| Directional
characteristics: |
Omnidirectional |
| Principle of
operation: |
Pressure |
| Cartridge type: |
24 mm (1 in) condenser w. stainless steel
diaphragm |
| Frequency
range,
± 2 dB: |
10 Hz - 20 kHz with 4 - 6 dB
soft boost at 8 kHz |
| Sensitivity, nominal, ±2
dB: |
85 mV/Pa; -22 dB re. 1 V/Pa |
| Equivalent
noise level A-weighted: |
Typ. 9 dB(A) re. 20
µPa |
| Equiv. noise level ITU-R
BS.468-4: |
Max. 22 dB |
| S/N ratio,
re. 1 kHz at 1 Pa (94 dB SPL): |
85 dB(A) |
| Total harmonic distortion
(THD): |
<0.5% THD up to 120 dB SPL peak, <1% THD
up to 126 dB SPL peak |
| Dynamic
range: |
Typ. 117 dB |
| Output impedance: |
Matches HMA5000 input |
| Max. SPL,
peak before clipping: |
144 dB |
| Cable drive
capability: |
From microphone to HMA5000; Up to 20 m (66 ft).
From HMA5000: Up to 300 m (984 ft) |
| Current
consumption: |
2 mA (and 300mA for the filament
in the tube) |
| Connector: |
7-pin modified XLR-M (High
Voltage) |
| Weight: |
190 g (6.7
oz) |
| Length: |
170 mm (6.7 in) |
| Capsule
diameter: |
24 mm (0.94
in) |
| Power supply: |
130 V via HMA5000 |
|
| |
|
|
|
|
|
