|
|
| SLX Wireless
System |
|
|
Product Code: SLX
|
Smart, Hard-Working
Wireless.
Sound installations and working bands need powerful wireless tools
that can be set up quickly and used confidently. The rugged
SLX® UHF Wireless Systems exceed these demands with innovative
setup features such as auto frequency scan with transmitter setup,
exceptional wireless clarity, and legendary Shure
microphones. |
|
| Features |
Supporting 20
compatible systems across multiple UHF frequency bands, SLX
smoothly integrates into houses of worship, lecture halls,
conference rooms, and mobile gear cases.
SLX Wireless Systems feature the Shure patented Audio Reference
Companding for clear sound beyond the limits of conventional
wireless technology. |
|
| Specifications |
| Band |
Range |
Transmitter
Output |
| G4 |
470–494
MHz |
30 mW |
| G5 |
494–518
MHz |
30 mW |
| H5 |
518–542
MHz |
30 mW |
| J3 |
572–596
MHz |
30 mW |
| L4 |
638–662
MHz |
30 mW |
| P4 |
702–726
MHz |
30 mW |
| R13 |
794-806 MHz |
20 mW |
| R5 |
800–820
MHz |
20 mW |
| S6 |
838–865
MHz |
10 mW |
| JB |
806–810
MHz |
10 mW |
| Q4 |
740–752
MHz |
10 mW |
- NOTE: This Radio apparatus may
be capable of operating on some frequencies not authorized in your
region. Please contact your national authority to obtain
information on authorized frequencies for wireless microphone
products in your region.
- Operating Range Under Typical
Conditions
100m (300 ft.) Note: actual range depends on RF signal absorption,
reflection, and interference
- Audio Frequency Response
(+/– 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone
element.)
- Total Harmonic Distortion (ref.
+/– 38 kHz deviation, 1 kHz tone) : 0.5%,
typical
- Dynamic Range : >100 dB
A-weighted
- Operating Temperature Range
–18°C (0°F) to +57°C (+135°F)
Note: battery characteristics may limit this range
- Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage
applied to tip of WA302 phone plug) produces positive voltage on
pin 2 (with respect to pin 3 of low impedance output) and the tip
of the high impedance 1/4-inch output.
SLX1 Bodypack
Transmitter
- Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
- Gain Adjustment Range :
30dB
- Input Impedance : 1
MΩ
- RF Transmitter Output : 30 mW
maximum (dependent on applicable country
regulations)
- Dimensions : 108 mm H x 64 mm W
x 19 mm D (4.25 x 2.50 x 0.75 in.)
- Weight : 81 grams (3 oz.)
without batteries
- Housing : Molded ABS
case
- Power Requirements : 2
“AA” size alkaline or rechargeable
batteries
- Battery Life : >8 hours
(alkaline)
SLX2 Handheld
Transmitter
- Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
- Gain Adjustment Range :
10dB
- RF Transmitter Output : 30 mW
maximum (dependent on applicable country
regulations)
- Dimensions (including SM58
cartridge) : 254 mm x 51 mm dia. (10 x 2 in.)
- Weight : 290 grams (10.2 oz.)
without batteries
- Housing : Molded PC/ABS handle
and battery cup
- Power Requirements : 2
“AA” size alkaline or rechargeable
batteries
- Battery Life : >8 hours
(alkaline)
SLX4 Receiver
- Dimensions : 42 mm H x 197 mm W
x 134 mm D (1.65 x 7.76 x 5.28 in.)
- Weight : 816 g (1 lb. 13
oz.)
- Housing : Galvanized
steel
- Audio Output Level (ref.
+/– 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –13 dBV
1/4 inch connector (into 3000 Ω load): –2
dBV
- Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
- XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
- Sensitivity : –105 dBm for
12 dB SINAD, typical
- Image Rejection : >70 dB,
typical
- Power Requirements : 12–18
Vdc at 150 mA, supplied by external power supply
|
|
