|
|
|
MX405 and MX410 Microflex Miniature Gooseneck
Microphones |
|
|
Product Code:
MX405 and MX410
|
Flexible in more ways than one,
Microflex® Miniature Gooseneck microphones deliver unsurpassed
style and performance for conference rooms and similar
applications. Offering desktop or mounted bases, wired or wireless
options, and even interchangeable cartridges, it’s easy to
get the perfect fit for your conferencing installation. Fully
compatible with SLX® wireless systems. |
|
| Features |
- Available in 5 inch (127 mm) and
10 inch (254 mm) lengths
- Cardioid and supercardioid polar
patterns
- Bi-color status indicator or
single color light ring
- Programmable mute switch
(desktop models only)
- Logic input/output for remote
LED and mute control
- Surface-mount and wired or
wireless desktop base options
- CommShield® Technology for
improved RF filtering
The polar pattern of the cartridges below are indicated by the
model number suffix:
C = Cardioid, S = Supercardioide, N = No Cartridge
| Miniature Gooseneck
Models |
| MX405/C
MX405/S
|
5 inch (127 mm), bi-color status
indicator, includes surface mount preamp |
| MX405R/N |
5 inch (127 mm), light ring,
includes surface mount preamp |
| MX410/C
MX410/S
|
10 inch (254 mm), bi-color
status indicator, includes surface mount preamp |
| MX410R/N |
10 inch (254 mm), light ring,
includes surface mount preamp |
| MX405LP/C
MX405LP/S
|
5 inch (127 mm), bi-color status
indicator, less preamp |
| MX405RLP/N |
5 inch (12.7 cm), light
ring, less preamp |
| MX410LP/C
MX410LP/S
|
10 inch (25.4 cm), bi-color
status indicator, less preamp |
| MX410RLP/N |
10 inch (25.4 cm), light ring,
less preamp |
| Mounting
Options |
| MX400DP |
Desktop Base for MX405 and MX410
models |
| MX890 |
Wireless Desktop Base for
MX405 and MX410 models |
| MX400SMP |
Surface Mount Preamp for MX405
and MX410 models |
|
|
| Specifications |
- Type : Condenser (electret
bias)
- Frequency Response : 50–17000
Hz
- Polar Pattern
MX405/C, MX410/C: Cardioid
MX405/S, MX410/S: Supercardioid
- Output Impedance : EIA Rated at 150
Ω (170 Ω actual)
- Output Configuration : Active
balanced
- Sensitivity (at 1 kHz , open
circuit voltage)
Cardioid: –35 dBV/Pa (18 mV)
Supercardioid: –34 dBV/Pa (21 mV)
1 Pascal=94 dB SPL
- Maximum SPL (1 kHz at 1% THD, 1
kΩ load)
Cardioid: 121 dB
Supercardioid: 120 dB
- Equivalent Output Noise
(A-weighted)
Cardioid: 28 dB SPL
Supercardioid: 27 dB SPL
- Signal-to-Noise Ratio (referenced
at 94 dB SPL at 1 kHz)
Cardioid: 66 dB
Supercardioid: 68 dB
- Dynamic Range (1 kΩ load at 1
kHz) : 93 dB
- Common Mode Rejection (10 Hz to 100
kHz) : 45 dB minimum
- Preamplifier Output Clipping Level
(1% THD) : –8 dBV (0.4 V)
- Polarity
3-Pin XLR: Positive sound pressure on diaphragm produces
positive
voltage on pin 2 relative to pin 3 of output XLR connector.
5-Pin XLR: Positive sound pressure on diaphragm produces
positive
voltage on pin 4 relative to pin 2 of output XLR
connector.
- Net Weight
MX405: 0.054 kg (0.119 lbs)
MX410: 0.068 kg (0.150 lbs)
MX400DP: 0.516 kg (1.138 lbs)
MX400SMP (w/ Kit): 0.125 kg (0.275 lbs)
- Logic Connections
LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum
voltage:
-0.7V to 50V.
LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL
compatible.
Absolute maximum voltage: -0.7V to 50V (up to 50V through
3kΩ).
- Mute Switch Attenuation : –50
dB minimum
- Cable
MX400DP: 6.1 m (20 ft) attached cable with shielded audio pair
terminated at a 3-pin male XLR and three unterminated conductors
for
logic control
- Environmental Conditions
Operating Temperature: -18–57 °C (0–135
°F)
Storage Temperature: -29–74 °C (-20–165
°F)
Relative Humidity: 0–95%
- Power Requirements : 48–52
Vdc phantom, 8.0 mA
|
|
|
