RODE MICROPHONES

Page 1 2 3 4 5 6

Compatible microphones : VideoMic GO

The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
 

Weight : 15gm
Dimensions : 180mmH x 70mmW x 70mmD
Warranty : 1 year

The DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote Lyre shockmounting (after May 2015). For VideoMic Pro models with band suspension please see DeadCat VMP.

Compatible microphones : Blimp

The DeadWombat windshield is designed for minimising wind noise when recording in high wind conditions using the RØDE Blimp. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Weight : 124.00gm
Dimensions : 515.00mmH x 170.00mmW x 170.00mmD
Warranty : 1 year

Compatible Accessories : RM1, RM3, RM5, SM4, Pivot Adaptor

The DS1 is a table top desk stand for your RØDE microphones. The DS1 gives you the ability to mount your microphone on a desktop for interview, dictation and other related uses.

Weight : 980.00gm
Dimensions : 260.00mmH x 147.00mmW x 147.00mmD
Warranty : 1 year

Compatible Accessories : Tripod, Pivot Adaptor

The GN1 is a minature gooseneck microphone stand for the RØDE NT6. The RØDE NT6 comes with a swivel mount that gives you great flexibility, by using the GN1 you also get an added height that allows you to have totally control over the placement of this microphone.

Weight : 22.00gm
Dimensions : 120.00mmH x 9.00mmW x 9.00mmD
Warranty : 1 year

The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.

Weight : 5.00gm
Dimensions : 18.00mmH x 25.00mmW x 6.00mmD
Warranty : 1 year

The LAV-CLIP is an ergonomic and discreet clip mount for the RØDE Lavalier microphone. The LAV-CLIP is supplied in a pack of three.

Weight : 3.00gm
Dimensions : 24.00mmH x 11.00mmW x 27.00mmD
Warranty : 1 year

The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RØDE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mouth for optimal audio performance.

Engineered from spring steel that has been plated for lifelong durability, the mount is designed to hold its shape throughout the rigors of repeated use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief.

The Lav-headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide the sizes are:
- Junior – Ages up to 13
- Medium – Teen to Adult
- Large – Larger Adult

Weight : 5gm
Dimensions : 100mmH x 140mmW x 200mmD
Warranty : 1 year

The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 1.2m (4') length is heavy-duty, shielded and Kevlar reinforced.

Weight : 6.00gm
Dimensions : 1200.00mmH x 1.50mmW x 1.50mmD
Warranty : 1 year

The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 3m (10) length is heavy-duty, shielded and Kevlar reinforced. Black in colour.

Weight : 15.00gm
Dimensions : 30000.00mmH x 1.50mmW x 1.50mmD
Warranty : 1 year

The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-1 is designed to connect to the Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.

Weight : 10.00gm
Dimensions : 39.00mmH x 10.00mmW x 10.00mmD
Warranty : 1 year

The SC8 is a premium shielded extension cable for use with the VideoMicro and VideoMic GO microphones. Measuring 6m/20', the SC8 features gold plated contacts for superior audio reproduction.

The SM8 is a specially designed shockmount engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the RØDE NTG8 long shotgun microphone. The unique mounting system ensures the microphone is balanced despite its size.

Dimensions : 151.00mmH x 65.00mmW x 117.00mmD
Warranty : 1 year

The SMR is a revolutionary shock mount for large diaphragm condenser microphones from RØDE. Featuring a unique double-Lyre suspension system, the SMR enhances the existing superior vibration cancellation of Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element. This maintains each Lyre in the neutral position where it is most efficient at cancelling vibration. The SMR's removable all-metal pop filter is as effective as it is visually striking, providing an integrated solution for plosive protection that is easily washable and designed to last as long as the shock mount and microphone. The clamping system of the SMR utilises a greater surface area for increased friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is virtually immune to the wear and tear of repeated use. The SMR's frame is constructed from an engineering grade reinforced polymer, typically only seen in high-load applications such as safety equipment, automotive components, and military artillery. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system. Efficient and well-considered cable-management completes the package. A base nut is also included, suitable for all compatible RØDE microphones.

Weight : 260.00gm
Dimensions : 130.00mmH x 220.00mmW x 210.00mmD
Warranty : 1 year