| The APS 25-UH2 powered speaker system is a fully
self-contained wireless sound reinforcement system with two UHF
wireless handheld transmitters.
Incorporating a 20 watt amplifier, the APS 25 is a
rugged, 2-way speaker with a 5.25" shielded woofer and a 1"
wide-dispersion tweeter that produces clear detailed sound for all
corporate, educational and commercial
applications.
The APS
25 includes a Master Volume control and Tone control to reduce
feedback. Individual level controls for each of the four inputs-
two wireless, one wired mic level, and one line level-giving you
more ways to configure your system. The speaker's variable line
level output lets you daisy chain multiple speakers. The high gain
mic input shorts automatically to reduce noise when no mic is
plugged in.
Included with the APS 25 is the Auto On-Off
circuitry triggered by any audio input signal for hands-off system
startup; a high impact case for reliability, and
dual-voltage(110/220V) switching to facilitate installation and
use. The speaker can be used free standing, stand-mounted (5/8x27
threaded holes on the bottom and side) or wall-mounted with the
supplied U-mount bracket.
The APS
25-UH2 includes two APS-UR UHF receiver modules and two 10HT
transmitter/microphones.
Speaker Technical Specs:
Rated Power: 20 Watts continuous
Frequency Response: 65Hz – 18kHz
Max SPL @ Rated Output: 101db @ 1 meter
Woofer: 5.25" (133.35mm) high efficiency - magnetically
shielded
Tweeter: 1" (25mm) dome
Crossover: 1st order passive @ 8kHz
Tone Control: -6dB/octave sliding low pass (3kHz to
8kHz)
Wireless Inputs: 2 user-installable receivers
VHF (169-213mHz) – 30 fixed frequencies
UHF (794-806mHz) – 63 user-selectable frequencies
Infrared – 2 fixed frequencies
Wired
Inputs/Output:
Mic: -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone
jack, variable
Line: -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack,
variable
Line-Out: +15dBv max - RCA jack
Weight:
8.5lb (3.85kg) approx. w/out receivers
Dimensions: 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm)
Compliance: UL, C-UL, and FCC approved
AC Power Requirements: User switchable, 110-125 / 210-240VAC -
50Hz/60Hz
Included w/speaker: Removable wall-mount bracket
with 2 screws, rubber anti-rotate pads, removable right-angle, AC
cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2
noise-canceling circuit boards (depending on how many modules are
installed
Receiver Technical Specs:
Frequency Range: UHF 63-channel Selectable (793.750-805.875MHz)
Oscillator: PLL Synthesized
RF Squelch Level: 14dBµV
Frequency Response: 50Hz - 15kHz
S/N Ratio: better than 90dB (A weighted)
Audio Distortion: <1% @ 1kHz
Operating Temperature Range: 0° - 50° C (32° -
122° F)
Power Requirements: 12V DC @ 120mA
Technical Specs:
Frequency Range: UHF 63 channel selectable (793.750 -
805.875MHz)
Oscillator: PLL synthesized
RF Power: 10mW
Frequency Response: 50Hz - 12kHz
Max. Deviation: +/- 75kHz @ 1kHz modulation, Mic input - 11dBm
S/N Ratio: better than 70dB "A" weighted
Audio Distortion: less than 1% @ 1kHz
Mic Element: ECM
Mic Sensitivity: +/- 5kHz @ -46dBm (0dBm +0.775V)
Operating Temp.: 0 - 50 C (32 - 122 F)
Power Requirement: 2 "AA" Alkaline batteries (2x 1.5VDC)
Battery Life: 8-10 hours w/Alkaline batteries
Dimensions; 230H x 44 mm (9.05 x 1.73")
Weight: approx. 130g w/batteries (4.58 oz)
|
> AZDEN > AC and Battery Speakers >
APS
25-UH2
