|
|
|
|
|
| |
|
AZDEN APS
25-UL2 Powered Speaker System (Discontinued)
|
|
|
The APS 25-UL2 powered
speaker system is a fully self-contained wireless sound
reinforcement system with two UHF wireless bodypack
transmitters.
Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way
speaker with a 5.25" shielded woofer and a 1" wide-dispersion
tweeter that produces clear detailed sound for all corporate,
educational and commercial applications.
The APS 25 includes a Master Volume control and Tone control to
reduce feedback. Individual level controls for each of the four
inputs- two wireless, one wired mic level, and one line
level-giving you more ways to configure your system. The speaker's
variable line level output lets you daisy chain multiple speakers.
The high gain mic input shorts automatically to reduce noise when
no mic is plugged in.
Included with the APS 25 is the Auto On-Off circuitry triggered by
any audio input signal for hands-off system startup; a high impact
case for reliability, and dual-voltage(110/220V) switching to
facilitate installation and use. The speaker can be used free
standing, stand-mounted (5/8x27 threaded holes on the bottom and
side) or wall-mounted with the supplied U-mount bracket.
The APS 25-UL2 includes two APS-UR5 UHF receiver modules and two
15BT bodypacks with the EX-503L lavalier microphones.
Speaker Technical
Specs:
Rated Power: 20 Watts continuous
Frequency Response: 65Hz – 18kHz
Max SPL @ Rated Output: 101db @ 1 meter
Woofer: 5.25" (133.35mm) high efficiency - magnetically
shielded
Tweeter: 1" (25mm) dome
Crossover: 1st order passive @ 8kHz
Tone Control: -6dB/octave sliding low pass (3kHz to 8kHz)
Wireless Inputs: 2 user-installable receivers
VHF (169-213 MHz) – 30 fixed frequencies
UHF (566.25-589.75 MHz) – 92 user-selectable frequencies
Infrared – 2 fixed frequencies
Wired Inputs/Output:
Mic: -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone
jack, variable
Line: -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack,
variable
Line-Out: +15dBv max - RCA jack
Weight: 8.5lb (3.85kg) approx. w/out receivers
Dimensions: 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm)
Compliance: UL, C-UL, and FCC approved
AC Power Requirements: User switchable, 110-125 / 210-240VAC -
50Hz/60Hz
Included w/speaker: Removable wall-mount bracket with 2 screws,
rubber anti-rotate pads, removable right-angle, AC cord, 4
self-adhesive anti-skid pads, 4 module screws, 1 or 2
noise-canceling circuit boards (depending on how many modules are
installed
Receiver Technical
Specs:
Frequency Range: UHF 92-channel Selectable (566.25 MHz to
589.75MHz)
Oscillator: PLL Synthesized
RF Squelch Level: 14dBµV
Frequency Response: 50Hz - 15kHz
S/N Ratio: better than 90dB (A weighted)
Audio Distortion: <1% @ 1kHz
Operating Temperature Range: 0° - 50° C (32° -
122° F)
Power Requirements: 12V DC @ 120mA
Transmitter Technical
Specs:
RF Power: 25 mW
Antenna: ¼ wavelength
Frequency Response: 50 Hz - 15 kHz
Reference Deviation: ± 5 kHz (-60 dBm - 1 kHz input) - ±
40 kHz max deviation
Noise Reduction: Compander (TOKO)
Power Reqirement: 2 “AA” Batteries (Alkaline) - 6-8
hours runtime
Dimensions: 63W x 98H x 27D mm - 2.48W x 3.86H x 1.06D inches
Weight: ≅160 g (5.64 oz) w/batteries
Supplied Mic: Clip-on ECM Lavalier |
 |
|
| |
|
> AZDEN > AC and Battery Speakers > APS
25-UL2
