AZDEN Pro Audio Wireless
Powered Speaker

 AZDEN APS-25 Powered Speaker System

Discontinued

The new Azden APS 25 powered speaker is designed to be as versatile as possible: wireless or wired, expandable, wall or stand-mounted, and built for absolute reliability-so you could cover the broadest spectrum of audio installations.
Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.

Only the APS 25 offers you the ability to include UHF, VHF or Infrared wireless microphone modules. And, you can use either one or two modules, initially or later on. You can order the speaker in any number of configurations and add to it in the future. With 30 VHF frequency modules, 92 channel user-selectable UHF modules or Infrared wireless, you can have multiple systems in one venue without interference.

The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic-level, and one line-level - giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.

Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system start-up; a high impact case for reliability, and dual-voltage (110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8"x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.

Technical Specs:

Rated Power: 20 Watts continuous
Frequency Response: 65Hz – 18kHz
Max SPL @ Rated Output: 101db @ 1 meter
Woofer: 5.25" (133.35mm) - magnetically shielded
Tweeter: 1" (25mm) dome
Crossover: 1st order passive @ 8kHz
Tone Control: -6dB/octave sliding low pass (3kHz to 8kHz)

Wireless Inputs: 2 user-installable receivers
VHF (169-213 MHz) – 30 fixed frequencies
UHF (566.25-589.75 MHz) – 92 user-selectable frequencies
Infrared – 2 fixed frequencies

Wired Inputs/Output:
Mic: -81dBv (0.089mVRMS) for 1 watt, 100K balanced
¼" phone jack, variable
Line: -40dBv (10mVRMS) for 1 watt, 10K unbalanced
RCA jack, variable
Line-Out: +15dBv max - RCA jack
Weight: 8.5lb (3.85kg) approx. w/out receivers
Dimensions: 12.4"H X 7.09"W X 5.6"D
315 X 180 X 142mm
Compliance: UL, C-UL, CE and FCC approved
AC Power Requirements: 110-125 / 210-240VAC - 50Hz/60Hz
Included w/speaker: Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed