AKG Pro Audio

AKG Pro Audio
PZM®-11 Crown Microphones

AKG Pro Audio

Homepage

Azden Sound Devices Sennheiser Tascam Yamaha  JBL  Mackie Projector Monitor Tapes E-Shop Contact us Email us Visit Us
Home > AKG Pro Audio > Crown Microphones > PZM-11  
 
  Installed  
  Gooseneck Microphones
  Hanging Microphones
  Paging Microphones
  Boundary Layer & Shotgun Microphones
  Crown Microphones
  PZM®-10/PZM®-10LL
  PZM®-11
  PZM®-11LLWR
  PZM®-30D
  PZM®-6D
  PZM®-185
  Sound Grabber II
  PCC®-130/PCC®-130SW
  PCC®-160
  PCC®-170
  PCC®-170SW
  MB-3
  MB-4
  Conference Systems
  Automixer
  Recording
  Recording Microphones
  Recording & Broadcast Microphones
  ULS Series
  AKG Blue Line
  Perception
  USB Microphones
  Stage
  Handheld Microphones
  Instrument Microphones
  Clip-on Microphones
  Head-worn Microphones
  Crown Microphones
  Lavalier Microphones
  Wireless
  Digital Wireless Microphones Systems
  Analog Wireless Microphones Systems
  In-ear Monitoring Systems
  HiQnet
  Headphones
  Professional Headphones
  Headsets
  Accessories
  AC Power Supplies
  Adapters
  Battery Power Supplies
  Cables
  Carrying Cases And Bags
  Goosenecks
  Microphone Stands
  Rack Mount Units
  Stand Adapters
  Suspensions And Clamps
  Windscreen And Pop Filters
  Miscellaneous
PZM-11

AKG Pro Audio
Product Code:
pzm11
 LaCie d2 Network 2 301504

The PZM-11 present a low-cost solution for security and surveillance applications. Mounted on a standard wall plate the PZM-11 doesn’t look like a microphone but rather an ordinary light switch.

Like other Pressure Zone Microphones, the PZM-11 utilize the Pressure Recording Process™ in which a miniature condenser microphone capsule is mounted very close to a sound reflecting plate or boundary. The benefits are a wide, smooth frequency response free of phase interference, excellent clarity and “reach”, and consistent pickup anywhere around the microphone. Intelligibility is excellent, with low frequencies below the voice range rolled off to reduce the pickup of heating, ventilation or air-conditioning rumble (HVAC noise). The high-frequency response is boosted slightly to aid clarity and articulation. Electronics on the rear of the plate offer screw terminals, eliminating the need for connectors.

The PZM-11 has a mic-level output and is powered by 12-48 V phantom power.


PZM 11 Features
  • Hemispherical polar pattern, excellent intelligibility
  • Low frequency roll off to reduce HVAC rumble
  • Inconspicuous, resembles a light switch
  • Mounts a standard wall plate
  • Screw terminal, no need for connectors

PZM 11 Specifications
  • Polar pattern: hemispherical
  • Frequency range: 80 to 20,000 Hz
  • Sensitivity: 5 mV/Pa (-46 dBV)
  • Max. SPL: 120 dB
  • Equivalent noise level: 26 dB-A
  • Signal/noise ratio: 68 dB (A-weighted)
  • Impedance: 225 ohms
  • Connector: screw terminal
  • Finish: Off-white. May be painted any color.
  • Dimensions: 11.506 x 7.05 x 2.946 cm (4.53 x 2.7 x 1.16 in.)
  • Net weight: 71 g (2.5 oz.)

 

Read our blogs