AKG Pro Audio

AKG Pro Audio
PZM®-185 Crown Microphones

AKG Pro Audio

Homepage

Azden Sound Devices Sennheiser Tascam Yamaha  JBL  Mackie Projector Monitor Tapes E-Shop Contact us Email us Visit Us
Home > AKG Pro Audio > Crown Microphones > PZM-185  
 
  Installed  
  Gooseneck Microphones
  Hanging Microphones
  Paging Microphones
  Boundary Layer & Shotgun Microphones
  Crown Microphones
  PZM®-10/PZM®-10LL
  PZM®-11
  PZM®-11LLWR
  PZM®-30D
  PZM®-6D
  PZM®-185
  Sound Grabber II
  PCC®-130/PCC®-130SW
  PCC®-160
  PCC®-170
  PCC®-170SW
  MB-3
  MB-4
  Conference Systems
  Automixer
  Recording
  Recording Microphones
  Recording & Broadcast Microphones
  ULS Series
  AKG Blue Line
  Perception
  USB Microphones
  Stage
  Handheld Microphones
  Instrument Microphones
  Clip-on Microphones
  Head-worn Microphones
  Crown Microphones
  Lavalier Microphones
  Wireless
  Digital Wireless Microphones Systems
  Analog Wireless Microphones Systems
  In-ear Monitoring Systems
  HiQnet
  Headphones
  Professional Headphones
  Headsets
  Accessories
  AC Power Supplies
  Adapters
  Battery Power Supplies
  Cables
  Carrying Cases And Bags
  Goosenecks
  Microphone Stands
  Rack Mount Units
  Stand Adapters
  Suspensions And Clamps
  Windscreen And Pop Filters
  Miscellaneous
PZM-185

AKG Pro Audio
Product Code:
pzm185
 LaCie d2 Network 2 301504

The PZM-185 Pressure Zone Microphone® is a budget microphone designed for general-purpose use. Ideal for applications such as conferences, group discussions, interviews, broadcast, homevideo production, lectures, and recordings. The mic can be placed on a large surface such as a table, floor, wall, or lectern.

The PZM-185 is powered either by an internal AAA 1.5 V battery or 12-48 V phantom power. The boundary “paddle” can be detached so the mic will fit in your pocket. It is nearly invisible on camera. The PZM-185 minimizes pickup of vibration and handling noise. It provides a wide, smooth frequency response from 50 Hz to 16 kHz. The mic’s hemispherical polar pattern allows clear pickup of everyone surrounding the microphone. The PZM-185 is protected against static and RFI. The output is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss.


PZM 185 Features
  • Hemispherical polar patter
  • Clear, bright sound quality with excellent bass
  • Works on internal AAA battery or phantom power
  • Low-impedance XLR-type output
  • Boundary “paddle” can be detached

PZM 185 Specifications
  • Polar pattern: hemispherical
  • Frequency range: 50 to 16 kHz
  • Sensitivity: 0.8 mV/Pa (-62 dBV)
  • Max. SPL: 120 dB
  • Equivalent noise level: 21 dB-A
  • Signal/noise ratio: 73 dB (A-weighted)
  • Impedance: 150 ohms
  • Connector: 3-pin XLR
  • Cable: 2,4 m (8 ft.)
  • Finish: satin black
  • Dimensions: 8.7 x 15 x 1.86 cm (3.409 x 5.9 x 0.732 in.)
  • Net weight: 115 g (4 oz.)

 

Read our blogs