|
|
| 2-port "T" digital panel
interface module |
|
|
2-PORT DIGITAL
INTERFACE MODULE. The dual channel DIG-2 module provides two
panel-to-matrix connections over a single twisted pair cable, such
as XLR-3 tielines or mic circuits. A pair of DIG-2 units are
required for all but the V-Series panels, which if ordered in the
T-adapter version, come with the DIG-2 interface built-in. The
DIF-102 rack holds up to two DIG-2 dual interfaces.
|
Product Code: DIG2
|
|
| Technical Details |
Technical
Specifications
Analog
Ports
Number of ports: 2
Audio Sample Rate: 16 kHz
CODEC Resolution: 16 bits
Nominal Level: 0dBu
VOX Threshold: -20dBu (input and output)
Frequency Response: 40Hz - 6.8 kHz, +0.5 dB, -3 dB
Signal to Noise Ratio: < -52dB
Specified Cable Type: Braid shielded CAT5e/CAT6e STP (4 pairs
used)
Specified Cable Length: 3,300 ft (1000m) max
Digital Ports
Number of Ports: 2
Isolation Both ends transformer isolated (twisted pair)
Transmission Type: ISDN-U interface, 160kbps, full duples
Audio Sample Rate: 16 kHz
CODEC Resolution: 8 Bits (G711)
Frequency Response: 40Hz - 6.8 kHz, +0.5 dB, -3 dB
Signal to Noise Ratio: < -52 dB
Specified Cable Type: Braid shielded CAT5e/CAT6e STP (1 pair
used)
Specified Cable Length: 10,000 ft (3000m) max 24 AWG
7,300 ft (2,200m) max 26 AWG |
|
|
