| |
3532-T2 Large
Diaphragm Stereo Kit w. 4041-T2
|
| |
Product
Code:3532T2Stereo
|
Model:3532T2
Other Microphones -
Microphone Kits
The 3532-T2 is a complete A-B
Stereo Kit consisting of two carefully factory-matched
omnidirectional Large Diaphragm Microphones Type 4041-T2 with a
pentode vacuum tube preamplifier driven as a cathode follower in a
unity gain class A design.
|
|
| |
|
|
| |
|
| |
|
3532-T2 Large Diaphragm Stereo
Kit w. 4041-T2
-
the obvious choice for
high quality mobile stereo recordings
-
handles extreme sound
pressure levels
-
amplifier and stereo
boom included
The 3532-T2 is a
complete A-B Stereo Kit consisting of two carefully factory-matched
omnidirectional Large Diaphragm Microphones Type 4041-T2 with a
pentode vacuum tube preamplifier driven as a cathode follower in a
unity gain class A design.
Included is also the Hi-Voltage Microphone Amplifier Type
HMA5000 and a Stereo Boom all packed with cables in a
handy carrying case with a foam insert. Please refer to Related
products for full description of accessories.
The specially selected microphones are matched within 1 dB on both
frequency response, sensitivity and self noise. The maximum phase
response difference from 50 Hz to 20 kHz is 10°. The frequency
response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz
matches the response of the highly acclaimed Type 4040 Hybrid
Microphone.
The two 4041-T2 are powered via the standard HMA5000
Microphone Amplifier, creating an A-B stereo microphone system that
offers a slight musical coloration of the recording.
This is the ultimate choice for all professional A-B Stereo
recordings.
|
|
General
Specifications |
| Directional
characteristics: |
Omnidirectional |
| Principle of
operation: |
Pressure
gradient |
| Cartridge type: |
24 mm (1 in) condenser w. stainless steel
diaphragm |
| Frequency
range,
± 2 dB: |
10 Hz - 20 kHz with 4 - 6 dB
soft boost at 8 kHz |
| Equivalent noise level
A-weighted: |
Max. 10 dB(A) re. 20 µPa |
| Equiv. noise level ITU-R
BS.468-4: |
Max 22 dB |
| S/N ratio (A-weighted), re. 1
kHz at 1 Pa (94 dB SPL): |
85 dB |
| Total harmonic distortion
(THD): |
<0.5% up to 120 dB SPL peak,
<1% up to 126 dB SPL peak |
| Dynamic range: |
117 dB |
| Max. SPL,
peak before clipping: |
144 dB |
| Output impedance: |
Matches HMA5000 input |
| Cable drive
capability: |
With HMA5000: Up to 300 m (984
ft) |
| Power supply: |
130 V via HMA5000 |
| Connector: |
37-pin modified XLR-M (High
Voltage) |
| Weight: |
190 g (6.7 oz) |
| Phase
deviation for kit: |
<5° |
| Length: |
170 mm (6.69 in) |
| Capsule
diameter: |
24 mm (1 in) |
| Microphone length: |
170 mm (6.69 in) |
| Matching tolerance
(frequency response and sensitivity): |
±5 dB (20 Hz - 20
kHz) |
|
| |
|
|
|
|
|
